Which of the following could BEST be used to recover a failed RAID 1 disk after it has been replaced？（）
第1题：
You are the network administrator for . You manage a Windows Server 2003 computer that functions as a file server.The data volume on the server is configured as a software RAID-5 array. One of disks that contain the data volume fails. You replace the failed disk. You start the Disk Management utility and view the status listed in the following table.You need to restore fault tolerance.Which two actions should you perform?（） (Each correct answer presents part of thesolution. Choose two.)
A. Create a striped set that includes Disk1 and Disk2.
B. Initialize Disk3 and convert it to a dynamic disk.
C. Reactivate the RAID-5 array volume.
D. Repair the RAID-5 array volume to include Disk3.
E. Initiailize Disk3 and configure it as a basic disk.
F. Reactivate the missing disk.
第2题：
A system administrator has a failed disk drive that is mirrored to another disk drive. They successfully removed the logical volume copies off of the failed disk drive. Which of the following commands should be used to remove the failed disk drive from the volume group？（）
第3题：
A. RAID array management
B. CHKDSK
C. Monitoring agents
D. Partitioning management
第4题：
Which of the following storage tools could be used to initiate the rebuilding of a failed hard drive?（）
第5题：
A Windows 2003 server has the operating system installed on a software RAID mirror. After a failure of one disk in the array the server will no longer boot up. The other drive is still functioning. Which of the following should be done to correct the issue？ （）
第6题：
Which of the following system utilities would be used to change a drive type from dynamic tobasic?（）
第7题：
A server has a single failed hard drive in an array that is accessed through a hot plug backplane to ease replacement of failed drives. After replacing the drive several times， each of the replacement drives failed to power up and rebuild as the failed drive. Which of the following is the MOST likely cause of the failures？（）
第8题：
A. Tape restore utilities
B. Imaging utilities
C. Partitioning utilities
D. Array management utilities
第9题：
A server contains a 3 disk RAID 5 array. The red LED is illuminated on one of the drives. Which of the following should the server administrator perform？（）
第10题：
A server has had a drive fail in its storage RAID set. The administrator swaps the drive with a replacement and the RAID set does not automatically start to rebuild the replaced drive. Which ofthe following utilities would MOST likely be used to initialize the rebuilding of the replace mentdrive？（）