An administrator has just upgraded a server from non-hot plu

第1题：

An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. Theadministrator powers up the server， during POST the RAID controller is recognized but none of the drivelights flash.  Which of the following should the administrator do FIRST to trouble shoot the problem？（）

• A、 Check the backplane cabling.
• B、 Check the server BIOS.
• C、 Update the RAID controller firmware.
• D、 Install the latest hard drive firmware.

第2题：

An administrator has removed a SATA hard drive from a failed server. Which of the following adapters would MOST likely be used by the administrator to transfer files from the drive to a laptop？（）

• A、SATA to SCSI
• B、SATA to HBA
• C、SATA to USB
• D、SATA to SAS

第3题：

第4题：

A company would like to upgrade an old server to a multi-processor box. The server currently has asingle 3.0GHz 1Mb cache processor in it with a single empty socket. The only processor that is available from a manufacturer is a 3.0GHz 2Mb cache model.  Which of the following is the BEST reason why this upgrade will not work？（）

• A、 The socket size does not match
• B、 The cache is from a different manufacturer
• C、 The processors do not match
• D、 Processors cannot be upgraded after server has been deployed

第5题：

An administrator has just installed a web server for the company's Internet site. After bringing the system online, customers notify the administrator that they cannot connect to the server. The administrator tests the web server from a workstation and can access the website. The customers continue to report issues. Which of the following is the MOST likely reason for this?（）

• A、The server's firewall is misconfigured.
• B、The server's timeout feature is set incorrectly.
• C、The web server was not installed properly.
• D、The company firewall is misconfigured.

第6题：

An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem？（）

• A、The hard drives were not plugged into the server correctly.
• B、The controller driver is outdated and needs to be updated from the OEMs website.
• C、The firmware for the server is too old and does not support the new RAID controller card.
• D、The cable from the controller to the hard drive backplane is not connected.

第7题：

An administrator has ordered a new server and setup a dedicated RAID 1 array for the application database. While troubleshooting with performance monitoring tools， the administrator is receiving lowerread/write speeds than expected.  Which of the following would be the MOST likely cause for the lower performance？（）

• A、 The BIOS needs to be upgraded.
• B、 The administrator did not add the right amount of memory.
• C、 There is a cooling issue with the server.
• D、 The administrator did not order high enough RPM drives.

第8题：

第9题：

An administrator has just installed a new NIC into the server. The system POSTs fine and the NIC is recognized by the OS, but it does not receive an IP address. Which of the following is the MOST likely cause of this?（）

• A、The NIC is not on the HCL.
• B、The driver is incorrect on the server.
• C、The patch cable has not been seated properly.
• D、The NIC is not seated properly.

第10题：

An administrator is up grading the back up server from a single tape drive to a SCSI tape library. The library has been unpackaged， mounted， and the library drivers installed.  Which of the following items should the administrator have to connect the device to the backup server？（）

• A、 SCSI cable
• B、 SCSI interface adapter on the tape library
• C、 SCSI termination card on the server
• D、 iSCSI cable