Mode:Transparent,Domain Name:CISCO,Configuration Revision:3
Mode:Client,Domain Name:CISCO,Configuration Revision:3
Mode:Client,Domain Name:CISCO,Configuration Revision:5
Mode:Client,Domain Name:CISCO1,Configuration Revision:3
第1题:
利用VLAN技术可以把物理上连接的网络从逻辑上划分为多个不同的虚拟子网,可以对各个子网实施不同的管理策略。以下是某台交换机(Switch)的部分配置过程,其中空缺处的命令/参数可能是(48)。 Switch #vlan database Switch (vlan) # vtp ? Switch (vlan) #(48) Changing VTP domain name from NULL to Server1 Switch(vlan)# exit
A.vtp Server
B.vip domain Server1
C.vtp domain Server
D.vtp domain
第2题:
A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by a reload of the swith,will reset the VTP management domain name of the switch to a NULL value?()
A.#vtp domain unset
B.#delete vlan.dat
C.#no vtp domain
D.#vtp domain null
第3题:
阅读下面的配置信息,将(1)~(4)处空缺的内容填写在相应位置。
SW1>enable (进入特权模式)
SW1vlan database (进入VLAN配置子模式)
SW1(vlan)vtp server (设置本交换机为Server模式)
SW1(vlan)vtp domain (1) (设置域名)
SW1(vlan) (2) (启动修剪功能)
SW1(vlan)exit (退出VLAN配置模式)
SW1show (3) (查看VTP设置信息)
VTP Vetsion :2
Configuration Revision :0
Maximum VLANs supported locrlly :64
Number of existing VLANs :1
VTP Operating Mode :Server
VTP Domain Name :Server1
VTP Pruning Mode :Enable
VTP V2 Mode :Disabled
VTP Traps Generation :Disabled
MD5 digest :0x82 0x6B 0xFB 0x94 0x41 0xEF 0x92 0x30
Configuration last modified by 0.0.0.0 at 7-1-05 00:07:51
SW2vlan database
SW2(vlan)vtp domain NULL
SW2(vlan) (4)
Setting device to VTP CLIENT mode.
SW2(vlan)exit
第4题:
What is the purpose of the command shown below?vtp password Fl0r1da()
第5题:
下图中交换机同属一个VTP域。除交换机B外,所有交换机的VLAN配置都与交换机A相同。交换机A和B的VTP工作模式的正确配置是( )。
A) set vtp mode transparent和set vtp mode server
B) set vtp mode server和set vtp mode transparent
C) set vtp mode server和set vtp mode client
D) set vtp mode server和set vtp mode server
第6题:
A.When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistencies
B.Each broadcast domain on a switch can have its own unique VTP domain
C.VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.
D.When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.
E.VTP pruning is used to increase available bandwidth in trunk links
F.Client,server,and transparent are valid VTP modes
G. To configure a switch to be part of two VTP domains,each domain must have its own passwords
第7题:
图1中交换机同属一个VTP域。除交换机B外,所有交换机的VLAN配置都与交换机A相同。交换机A和B的VTP工作模式的正确配置是______。
A) set vtp mode transparent和set vtp mode server
B) set vtp mode server和set vtp mode transparent
C) set vtp mode server和set vtp mode client
D) set vtp mode server和set vtp mode server
A.
B.
C.
D.
第8题:
The Ezonexam network administrator has issued the "VTP password ezonexam" command on a Cisco device. What is the purpose of this command?
A.It allows two VTP servers to exists in the same domain, each configured with different passwords
B.It is the password required when promoting a switch from VTP client mode to VTP server mode
C.It is used to access the VTP server to make changes to the VTP configuration
D.It is used to validate the sources of VTP advertisements sent between switches
E.None of the above
第9题:
Which three statements about VTP features are true?()
第10题:
What action should you execute if you wanted to enable VTP pruning on your entire management domain?()