单选题Company.com has recently added a partition to an existing p5-550 4-way with 8GB RAM. When the newly-created third partition is started, it fails to initialize. The configuration of the partitions is as follows:  LPAR Min CPU Des CPU Max CPU  P1 0.8 1.4

题目
单选题
Company.com has recently added a partition to an existing p5-550 4-way with 8GB RAM. When the newly-created third partition is started, it fails to initialize. The configuration of the partitions is as follows:  LPAR Min CPU Des CPU Max CPU  P1 0.8 1.4 2.0  P2 0.8 1.4 2.0  P3 1.4 1.6 2.0 Which of the following actions will most likely resolve the problem?()
A

Reduce P3 max CPU to 1.8

B

Reduce min CPU on P3 to 1.2.

C

Recommend the purchase of additional CPU.

D

Ensure that partition 3 has a minimum of 4GB of memory.

如果没有搜索结果或未解决您的问题,请直接 联系老师 获取答案。
相似问题和答案

第1题:

Companycom has the following: 8 x 1.65GHz CPUs 16GB Memory 4 LPARs LPAR 1: Test/Dev 1 CPU, 2GB Memory, 1 Fibre Channel HBA, AIX 5.3 LPAR 2: QA 1 CPU, 2GB Memory, 1 Fibre Channel HBA, AIX 5.3 LPAR 3: Prod 3 CPUs, 6GB Memory, 1 Fibre Channel HBA, AIX 5.3 LPAR 4: Web App 3 CPUs, 6GB Memory, 1 Fibre Channel HBA, SUSE Linux Utilization over a 30 day period LPAR 1: Average utilization was 15%, Peak utilization was 100% LPAR 2: Average utilization was 25%, Peak utilization was 100% LPAR 3: Average utilization was 50%, Peak utilization was 90% LPAR 4: Average utilization was 35%, Peak utilization was 100% If the customer has a requirement for all four LPARs moved to a p5 590 and to have dedicated CPU resources. Which of the following would best describe the profile requirements?()

  • A、LPARs 1 and 2, SMT on, min CPU 1.0, max CPU 1.0, desired CPU 1.0 LPARs 3 and 4, SMT on, min CPU 1.0, max CPU 3.0, desired CPU 2.0 
  • B、LPARs 1 and 2, SMT on, min CPU 1.0, max CPU 1.0, desired CPU 1.0 LPARs 3 and 4, SMT on, min CPU 2.0, max CPU 3.0, desired CPU 3.0 
  • C、LPARs 1 and 2, SMT on, min CPU 1.0, max CPU 3.0, desired CPU 3.0 LPARs 3 and 4, SMT on, min CPU 1.0, max CPU 3.0, desired CPU 2.0 
  • D、LPARs 1 and 2, SMT off, min CPU 1.0, max CPU 1.0, desired CPU 1.0 LPARs 3 and 4, SMT off, min CPU 1.0, max CPU 3.0, desired CPU 3.0

正确答案:B

第2题:

Companycom has purchased a p5 590 with 16 CPUs. To run Simultaneous Multi-Threading (SMT) with a 4-way virtual processor partition with 2.0 processing units of entitlement, how many logical CPUs will be allocated?()

  • A、8-way logical CPU partition, where each logical CPU has the power of 25% of a logical processor 
  • B、4-way logical CPU partition, where each logical CPU has the power of 50% of a physical processor 
  • C、8-way logical CPU partition, where each logical CPU has the power of 25% of a physical processor 
  • D、16-way logical CPU partition, where each logical CPU has the power of 25% of a physical processor

正确答案:C

第3题:

An administrator has set up three partitions using a shared processor pool with 2 processors and SMT turned on. The partitions are activated in the following sequence: Partition one: Min = 0.5, max = 3.0, desired = 1.0; Partition two: Min = 1.0, max = 3.0, desired = 1.5 Partition three: Min = 1, max = 0.5, desired = 2. What is the outcome?()

  • A、Partition one starts and has 3.0 logical processors. Partition two does not start. Partition three has 1.0 logical processors. 
  • B、Partition one starts and has 1.5 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 processors. 
  • C、Partition one starts and has 2.0 logical processors. Partition two start and has 2.0 logical processors. Partition three does not start. 
  • D、Partition one starts and has 2.0 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 logical processors.

正确答案:C

第4题:

The workload requirement for a Web server running in Micro-Partitioned p5-550 has increased 300 percent over the past six months. The initial partition definitions assigned 0.5 processing units and one virtual processor to the Web server partition. Three months previously, an additional 0.5 CPU was added to the Web server partition. When the technical specialist attempted to allocate a further 0.5 CPU to this partition, no additional performance was achieved. Which of the following actions would most likely resolve the problem?()

  • A、Add another virtual Ethernet.
  • B、Change the partition to be uncapped.
  • C、Change the number of virtual processors to 2.
  • D、Increase the amount of memory assigned to the partition by 300 percent.

正确答案:C

第5题:

Company.com would like to share CPU resources between AIX V5.3 and Linux partitions. Which solution would best satisfy this customer requirement?()

  • A、Micro-Partitioning
  • B、Partition Load Manager
  • C、eWLM
  • D、Grid Toolbox

正确答案:A

第6题:

What is the effect of using Capacity on Demand on LPARs configured on a managed system?()

  • A、It allows dynamic increase of CPU and memory allocation for all LPARs.
  • B、It allows dynamic increase of CPU and memory allocation for LPARs when the 'Desired' and 'Maximum' partition profile values are equal.
  • C、It allows dynamic increase of CPU and memory allocation for LPARs when the 'Desired' partition profile values are less than the 'Maximum' values.
  • D、It allows dynamic increase of CPU and memory allocation for LPARs when the 'Desired' partition profile values are greater than the 'Maximum' values.

正确答案:C

第7题:

The database on a p5-570 Micro-Partition has grown and backups are not meeting the Service Level Agreement. There are several partitions using the Virtual I/O Server to access the storage array. The database backup has high CPU utilization while the others have low CPU utilization. What adjustment can the technical specialist make to ensure that the Service Level Agreement is achieved?()

  • A、Add memory to the database partition to improve response time.
  • B、Add additional Host Bus Adapters to the server to improve IO throughput.
  • C、Modify CPU allocations to favor the database partition.
  • D、Increase CPU allocations to the Virtual I/O Server.

正确答案:C

第8题:

An administrator has setup three partitions using shared pool with 2 processing units. They are activated in the following sequence: Partition one: Min. = 1.0, max = 2.0, desired = 1.5 Partition two: Min. = 1.0, max = 2.0, desired = 1.0 Partition three: Min. = 0.1, max = 1.0, desired = 0.8. What is the outcome?()

  • A、Partition one starts and has 2.0 processors allocated. Partition two does not start. Partition three does not start. 
  • B、Partition one starts and has 1.0 processors allocated. Partition two starts and has 1.0 allocated. Partition three does not start. 
  • C、Partition one starts and has 1.5 processors allocated. Partition two does not start. Partition three starts and has 0.8 processors allocated capacity. 
  • D、Partition one starts and has 1.5 processors allocated. Partition two does not start. Partition three starts and has an allocated capacity of 0.5 processors. 

正确答案:D

第9题:

Company.com has recently added a partition to an existing p5-550 4-way with 8GB RAM. When the newly-created third partition is started, it fails to initialize. The configuration of the partitions is as follows:  LPAR Min CPU Des CPU Max CPU  P1 0.8 1.4 2.0  P2 0.8 1.4 2.0  P3 1.4 1.6 2.0 Which of the following actions will most likely resolve the problem?()

  • A、Reduce P3 max CPU to 1.8
  • B、Reduce min CPU on P3 to 1.2.
  • C、Recommend the purchase of additional CPU.
  • D、Ensure that partition 3 has a minimum of 4GB of memory.

正确答案:B

第10题:

ompany.com has a Micro-Partitioned p5-570 4-way with six application partitions and two VIO servers. Each VIO server has been allocated 0.5 CPU and the application servers have been allocated 0.4 CPUs. The marketing department wants to deploy a new Web server to support the release of a product. The systems architect has recommended that the Web server will require a whole CPU. Which of the following should the technical specialist suggest to provide the most cost-effective deployment?()

  • A、Remove one application server partition and apply its CPU resources to the Web server.
  • B、Reassign the CPU from one of the VIO servers and create the new partition.
  • C、Add 0.6 CPU to one of the application servers and run the Web service with the application. 
  • D、Reassign a total of 0.4 CPUs from the application servers and create a new partition with awhole CPU for new deployment.

正确答案:D

更多相关问题