EAP-FASTEAP-FAS Access Point Protocol (LWAPP) packet is used to generate an 802.1 p priority value in the packets, which are sent to an Ethernet switch by the controllers.
The AP will police the 802.1 le priority value to ensure it does not exceed the maximum value allowed for the QoS policy that is assigned to that client.
Once the LWAPP packet is received, the AP generates the IEEE 802.1 p priority value.
The AP will map the 802.11e priority value to the DSCP value.
The AP will map the DSCP value to the outer LWAPP frame.
第1题:
体温和皮肤红润度
吸吮和吞咽能力
呼吸频率和心率
肌张力和神经反射
体重和病情
第2题:
第3题:
平卧头侧位
控制输液速度
昏迷时注意保护角膜
按医嘱予甘露醇降颅压
及早发现脑水肿,预防脑疝
第4题:
two
three
four
one
第5题:
enable concatenation on the non-root bridge only
enable concatenation on the root bridge only
enable concatenation on both the root bridge and non-root bridge
enable concatenation on the root bridge and set it as desirable on the non-root bridge
set concatenation as desirable on the root bridge and enable it on the non-root bridge
第6题:
Fabric ID
Native Vlan
Vlan Trunking
Trunk encapsulation
Mac Address assignment
第7题:
出疹后4天
出疹后6天
出疹后8天
出疹后10天
出疹后12天
第8题:
1个月左右
出生后1周左右
出生后2~3天
出生后立即查血
3个月左右
第9题:
Jitter
Delay
MTU
Reliability
第10题:
Disable post scan
Use SSH or SSL
Enable trust levels
Deny echo replies on all edge routers