Back up the configuration from Ethernet module in bay 2 and restore it to the module in Bay 1 using the switch CLI or Web interface
Swap the modules, which will automatically resynch the settings stored in the Advanced Management Module
Back up the configuration of the Ethernet module in bay one and restore it to the Ethernet module in bay two using the AMM
Restore the configuration from NVRAM using the Switch Module Web interface
第1题：
A customer wants to boot from SAN with their IBM BladeCenter infrastructure. What is required for the customer to be able to perform this？ （）
第2题：
When configuring unified ports on a 5548 switch， which port ordering must be respected？（）
第3题：
A network administrator has installed an N7K-F248-25XP module into an existing chassis. The module is powered on， but the interfaces are all in VDC0. What is the reason for this？（）
第4题：
A customer asks which bays they could install Multi-Switch Interconnect Module (MSIM). Which of the following is the source of this information?（）
第5题：
A banking customer deployed an IBM BladeCenter chassis with one Brocade 8Gb SAN switch module. The customer requires an 8Gb uplink or higher. Which configuration will meet this request?（）
第6题：
Your customer has converted from traditional servers to BladeCenter technology and has a requirement for an RSA adapter on a new BladeCenter server. Which of the following options would you use？ （）
第7题：
A customer has purchased a triple channel memory kit containing three DDR3 RAM modules. Theserver the RAM is intended for only has a dual channel capable motherboard. Which of the following is the BEST action to perform？（）
第8题：
A banking customer has two Ethernet Switch Modules installed in an IBM BCE chassis. The modules were configured identically. The Ethernet module in bay 1 was accidentally reset to factory defaults. Which solution returns the module to the customer-specific configuration? （）
第9题：
A retail customer installs a BladeCenter into an existing 10/100 Ethernet network. Due to cost considerations, the customer uses Copper Pass-thru Modules. After installing this solution, the customer finds that they have no network connectivity. Which of the following at is causing the problem?（）
第10题：
A banking customer has the following requirements for an IBM BladeCenter solution with high speed fibre channel： （1）four 4-socket Microsoft SQL servers with two hot swap SAS drives （2）two physical Microsoft Active Directory Servers （3）twenty-two physical Citrix servers （4）three physical Web servers （5）one physical vCenter server （6）eight vSphere hosts Which configuration minimally satisfies these requirements？（）