单选题A customer wants to run a Cluster 1600 configuration with multiple p655 servers.  They are using the new High Performance Switch for the high-speed interconnection between nodes.  Which of the following is the only supported cluster management software

第1题：

A customer is deploying a new Junos Pulse Access Control Service and has completed the initial boot configuration as prompted using a serial connection. The customer now wants to complete the rest of the configuration using the admin GUI.Into which port on the Junos Pulse Access Control Service should the customer plug the network cable to enable access to the admin GUI?（）

• A、the internal interface
• B、the external interface
• C、the management interface
• D、the console interface

第2题：

A customer has two single cluster IBM TS7700 Virtualization Engines at the same site. The customer wants to move one to a remote site and set up a grid configuration with the two clusters. The customer has fibre between the two sites. What is the most important factor to consider when planning the new configuration?（）

• A、operator training
• B、cache size of the two clusters
• C、fibre bandwidth capability between the sites
• D、number of stacked tape drives attached to each cluster

第3题：

第4题：

A customer wants to implement a clustered database solution on their existing x445 servers.  A minimum of four nodes must participate in the cluster， and the customer wishes to use open standards.  Which of the following best satisfies their requirements？（）

• A、Novell NetWare Cluster Services
• B、Red Hat Enterprise Linux Cluster Suite
• C、Microsoft Windows 2003 Server with MSCS
• D、Microsoft Windows 2003 Enterprise Edition

第5题：

A customer is putting together a high-performance computing cluster of p655 nodes.  They need a total of 48 processors and want to get the best performance possible out of those systems.  They are evaluating four options and have asked the pSeries technical specialist to recommend which one would provide the best performance based on total rPerf.  Their workload may grow over time. Which of the following should the pSeries technical specialist recommend？（）

• A、Twelve 4-way p655 nodes and add more as needed
• B、Six 8-way p655 nodes and add more as needed
• C、Six 4-way p655 nodes with four processors CoD on each node in case of growth
• D、Three 8-way p655 nodes with eight processors CoD on each node in case of growth

第6题：

A customer wants to migrate their existing cluster onto new POWER6 hardware， and in addition requires thecluster to be migrated from PowerHA version 5.3 to 5.5. Given that AIX 6.1 and PowerHA 5.5 filesets arealready installed in the new hardware， which of the following methods would allow the customer to maintaintheir current cluster configuration？（）

• A、Add the new nodes to the existing cluster， and perform a rolling migration and remove the original nodesfrom the cluster
• B、Add the new nodes to the existing cluster， and perform a non-disruptive upgrade and remove the originalnodes from the cluster.
• C、Create a snapshot of the existing cluster and apply the snapshot to the new cluster. Start cluster serviceson the new cluster and stop the original cluster
• D、Create a snapshot of the existing cluster and apply the snapshot to the new cluster. Stop cluster serviceson the original cluster and start on the new cluster

第7题：

A customer wants to run a Cluster 1600 configuration with multiple p655 servers.  They are using the new High Performance Switch for the high-speed interconnection between nodes.  Which of the following is the only supported cluster management software？（）

• A、CSM
• B、PSSP
• C、GPFS
• D、HACMP

第8题：

第9题：

A cluster administrator wants to create a snapshot backup of the cluster. Which smit menu can be used to dothis？（）

• A、Extended Configuration
• B、System Management （C-SPOC）
• C、Problem Determination Tools
• D、Initialization and Standard Configuration

第10题：

Which interconnect topology is supported for pSeries cluster solutions with Cluster Systems Manager？（）

• A、ATM
• B、Ethernet
• C、SP Switch2
• D、Fibre Channel