Assume the scoped attribute priority does NOT yet exist. Which two create and set new request-scoped attribute priority to the value “medium”？（） A、 ${priority = ‘medium’ } B、 ${requestScope[ ‘priority’ ] = ‘medium’ } C、 <c：set var=priority” value=”medium”

题目

Assume the scoped attribute priority does NOT yet exist. Which two create and set new request-scoped attribute priority to the value “medium”？（）

A、 ${priority = ‘medium’ }
B、 ${requestScope[ ‘priority’ ] = ‘medium’ }
C、 <c：set var=priority” value=”medium” />
D、 <c：set var=”priority” scope=”request”>medium</C://set>
E、 <c：set var=”priority” value=”medium” scope=”request” />
F、 <c：set property=”priority” scope=”request”>medium</c：set>
G、 <c：set property=”priority” value=”medium” scope=”request” />

如果没有搜索结果或未解决您的问题，请直接联系老师获取答案。

相似问题和答案

第1题：

Considerthefollowingcodesnippet:BEGINDBMS_SCHEDULER.SET_ATTRIBUTE(name=>,,lne_job1,attribute=>,,job_priority,value=>1);END;／Ifthiscodewereexecuted,whichofthefollowingstatementswouldbetrue?()

A.Thepriorityofthelne_job1jobwouldbesetto1.

B.Thelne_job1jobwouldbeexecutedsynchronously.

C.Thelne_job1jobwouldrunimmediatelyintheuserscurrentsession.

D.Thelne_job1jobwouldretainitscurrentpriority.

E.Thejobwillimmediatelytakepriorityoverallrunningjobs.

参考答案：A

第2题：

Youexecutedthefollowingcode:BEGINDBMS_SCHEDULER.SET_ATTRIBUTE(NAME=>’JOB_A’,ATTRIBUTE=>’JOB_PRIORITY’,VALUE=>7);END;／Afteranalyzingtheabovecode,whatconclusionwillyoudraw?()

A.Thecodewillbeexecutedsuccessfully.

B.ThecodewillnotbeexecutedsuccessfullybecausethevalueoftheVALUEparametermustbe1，2，or3.

C.ThecodewillnotbeexecutedsuccessfullybecausethevalueoftheVALUEparametermustrangebetween1and5.

D.ThecodewillnotbeexecutedsuccessfullybecausenoSET_ATTRIBUTEprocedureexistsintheDBMS_SCHDULERpackage.

参考答案：C

第3题：

AssumethescopedattributeprioritydoesNOTyetexist.Whichtwocreateandsetnewrequest－scopedattributeprioritytothevalue“medium”?()

A.${priority=‘medium’}

B.${requestScope[‘priority’]=‘medium’}

C.<c：setvar=priority”value=”medium”/>

D.<c：setvar=”priority”scope=”request”>medium</C：set>

E.<c：setvar=”priority”value=”medium”scope=”request”/>

F.<c：setproperty=”priority”scope=”request”>medium</c：set>

G.<c：setproperty=”priority”value=”medium”scope=”request”/>

参考答案：D, E

第4题：

Router R1 and R2 are both configured for HSRP. Which two statements about the HSRP priorities of these two routers are true？（）

A、 To assign the HSRP router priority in a standby group， the standby group-number priority priority-value global configuration command must be used.
B、 The default priority of a router is zero （0）.
C、 The no standby priority command assigns a priority of 100 to the router.
D、 Assuming that preempting has also been configured， the router with the lowest priority in an HSRP group would become the active router.
E、 When two routers in an HSRP standby group are configured with identical priorities， the router with the highest configured IP address will become the active router.

正确答案:C,E

第5题：

What is the protocol of following described： there are 4 priority queues：high，medium，normal.low the high and medium queue have precedence over the default queue the classifcation is configuration via the command ‘priority-list’ the default queue is the normal queue.

正确答案:Priority Queue

第6题：

If two windows overlap, which window attribute will determine whether one should be chosen over the other?()

A. WINDOW_PRIORITY

B. PRIORITY

C. PRIORITY_LEVEL

D. WINDOW_PRIORITY_LEVEL

E. OVERLAP_RULE

参考答案：A

第7题：

Whatistheprotocoloffollowingdescribed：thereare4priorityqueues：high，medium，normal.lowthehighandmediumqueuehaveprecedenceoverthedefaultqueuetheclassifcationisconfigurationviathecommand‘priority-list’thedefaultqueueisthenormalqueue.

PriorityQueue

第8题：

AssumethescopedattributeprioritydoesNOTyetexist.Whichtwocreateandsetanewrequest－scopedattributeprioritytothevalue"medium"?()

A.${priority=’medium’}

B.${requestScope[’priority’]=’medium’}

C.<c：setvar="priority"value="medium"/>

D.<c：setvar="priority"scope="request">medium</c：set>

E.<c：setvar="priority"value="medium"scope="request"/>

参考答案：D, E

第9题：

What are two things that an access point （AP） does when it receives an 802.11 frame from a Wi-Fi Multimedia （WMM） client？（）

A、EAP-FASTEAP-FAS Access Point Protocol （LWAPP） packet is used to generate an 802.1 p priority value in the packets， which are sent to an Ethernet switch by the controllers.
B、The AP will police the 802.1 le priority value to ensure it does not exceed the maximum value allowed for the QoS policy that is assigned to that client.
C、Once the LWAPP packet is received， the AP generates the IEEE 802.1 p priority value.
D、The AP will map the 802.11e priority value to the DSCP value.
E、The AP will map the DSCP value to the outer LWAPP frame.

正确答案:B,D

第10题：

Each port that is configured to use LACP has an LACP port priority. Which statements are true about LACP port priority？（）

A、 Port priority value can be configured between 1 and 65535.
B、 A higher port priority value means a higher priority of LACP.
C、 Port priority can be configured so that specific links can be chosen as active links rather than the hot standby links within the port channel.
D、 LACP uses the port priority with the port number to form the port identifier.
E、 LACP Port priority default value should always be changed

正确答案:A,C,D

Assume the scoped attribute priority does NOT yet exist. Which two create and set new request-scoped attribute priority to the value “medium”？（） A、 ${priority = ‘medium’ } B、 ${requestScope[ ‘priority’ ] = ‘medium’ } C、 c：set var=priority” value=”medium”

题目

相似问题和答案

更多相关问题

相关内容