Which of the following commands would be applied to a WAN interface, but not on LAN Interface?()A、IP addressB、encapsulation PPPC、no shutdownD、PPP authentication CHAPE、SpeedF、None of the above

题目

Which of the following commands would be applied to a WAN interface, but not on LAN Interface?()

  • A、IP address
  • B、encapsulation PPP
  • C、no shutdown
  • D、PPP authentication CHAP
  • E、Speed
  • F、None of the above
参考答案和解析
正确答案:B,D
如果没有搜索结果或未解决您的问题,请直接 联系老师 获取答案。
相似问题和答案

第1题:

路由器A的配置如下 Quidway#SHOW RUN Now create configuration... Current configuration ! ! interface Ethernet0 ip address 10.2.1.1 255.255.0.0 ! interface Serial0 encapsulation ppp backup interface Serial 1 ip address 2.1.1.1 255.0.0.0 ! interface Serial1 encapsulation ppp ip address 3.1.1.1 255.0.0.0 ! interface Serial2 flowcontrol normal async mode dedicated encapsulation ppp ! Exit Router rip ! End 路由器B的配置如下 Quidway#SHOW RUN Now create configuration... Current configuration ! ! interface Ethernet0 ip address 10.1.1.1 255.255.0.0 ! interface Serial0 encapsulation ppp backup interface Serial 1 ip address 2.1.1.1 255.0.0.0 ! interface Serial1 encapsulation ppp ip address 3.1.1.1 255.0.0.0 ! interface Serial2 flowcontrol normal async mode dedicated encapsulation ppp ! Exit Router rip ! End 下述说法正确的是

A、备份功能可以正常使用 B、备份功能不能正常使用 C、两端可以正常互联 D、两端不能正常互联


正确答案:BCD

第2题:

All WAN links is side the TestKing.com network use PPP with for authentication security. Which command will display the CHAP authentication process as it occurs between two routers in the network?()

A. show CHAP authentication

B. show interface serial 0

C. debug PPP authentication

D. debug CHAP authentication

E. show PPP authentication CHAP


参考答案:C

第3题:

Which of the following commands would be applied to a WAN interface, but not on LAN Interface? (Choose all that apply)

A. IP address

B. encapsulation PPP

C. no shutdown

D. authentication CHAP

E. Speed

F. None of the above


正确答案:BD
B,D 解析:Explanation:
PPP encapsulation can be used in ISDN interfaces, Asynchronous serial interfaces, and point to point serial WAN connections. PPP is not an option for LAN interfaces. CHAP authentication is a PPP 3 way authentication method. CHAP authentication can only be used on PPP encapsulated interfaces and is not a LAN interface configuration option.

Incorrect Answers:
A, C. This command can be applied to both LAN and WAN interface types.

E. The speed command is used on LAN interfaces, and is not used on WAN interface types.

第4题:

Which one of the following commands will display the placement and direction of an IP access control list on the interfaces of a router?()

A. show interface list

B. show ip route

C. show ip interface

D. show ip interface brief

E. show interface


参考答案:C

第5题:

You are troubleshooting a WAN connection for TestKing, and on the router you execute the, "debug ppp authentication" command, and view the following output:What kind of handshake was used for the PPP authentication?()

A. one-way

B. two-way

C. three-way

D. No handshakes required during authentication

E. None of the above


参考答案:C

第6题:

Which set of configuration commands illustrates the correct configuration steps for a PPP over ATM Interface?()

A. interface atm 5/1.1 atm pvc 1 0 101 aal5autoconfig profile ppp generic autoconfig ip

B. interface atm 5/1.1 atm pvc 1 0 101 aal5snap encapsulation ppp ppp authentication pap ip unnumbered loopback 1 ip access-routes

C. interface atm 5/1.1 atm pvc 1 0 101 aalmux ip encapsulation ppp ppp authentication pap ip unnumbered loopback 1 ip access-routes

D. interface atm 5/1.1 atm pvc 1 01 101 aal5snap encapsulation pppoa ppp authentication chap ip profile generic


参考答案:B

第7题:

You are preparing to create a point to point WAN by connecting a Cisco router with a Juniper router by way of their serial links. Which one of the following commands would you use?()

A. TK1(config-if)# encapsulation hdlc ansi

B. TK1(config-if)# encapsulation ppp

C. TK1(config-if)# encapsulation LAPD

D. TK1(config-if)# encapsulation frame-relay ietf

E. TK1(config)#encapsulation ppp


参考答案:B

第8题:

路由器A的配置如下: Quidway#SHOW RUN Current configuration ! user huawei service-type ppp password 0 quidway ! interface Ethernet0 ip address 1.1.1.1 255.0.0.0 ! interface Serial0 encapsulation ppp ppp authentication chap ppp chap host huawei ip address 2.1.1.1 255.0.0.0 ! interface Serial1 encapsulation ppp ! interface Serial2 flowcontrol normal async mode dedicated encapsulation ppp ! exit ip route 0.0.0.0 0.0.0.0 2.1.1.2 preference 60 end 路由器B的配置如下 Quidway#SHOW RUN Current configuration ! user hw service-type ppp password 0 quidway ! ip address 3.1.1.1 255.0.0.0 ! interface Serial0 clock-select DTECLK1 encapsulation ppp ppp chap host huawei ip address 1.1.1.2 255.0.0.0 ! interface Serial1 encapsulation ppp ! interface Serial2 flowcontrol normal async mode dedicated encapsulation ppp ! exit ip route 0.0.0.0 0.0.0.0 2.1.1.2 preference 60 end 发现两端路由器不能PING同对端以太网端口,下述说法正确的是

A、A验证配置错误 B、B验证配置错误 C、A验证方路由配置错误 D、B被验证方路由配置错误


正确答案:BCD

第9题:

You are an administrator of a network that uses PPP for CHAP authentication over ever WAN link. What command would you enter to display the CHAP authentication as it occurs in real time?()

A. show ppp authentication

B. debug PAP authentication

C. debug PPP authentication

D. show interface serial0

E. show CHAP authentication


参考答案:C

第10题:

A network administrator needs to configure a router for a Frame Relay connection to a non-Cisco router. Which of the following commands will prepare the WAN interface for this connection?()

A. Router(config-if)# encapsulation frame-relay q933a

B. Router(config-if)# encapsulation frame-relay ansi

C. Router(config-if)# encapsulation frame-relay ietf

D. Router(config-if)# encapsulation frame-relay isl

E. None of the above


参考答案:C

更多相关问题