You are the network administrator for Company.Company has just upgraded its network switches from 10 Mbps to 100 Mbps. After the upgrade， you findthat the 100 Windows 2000 Professional computers on the network are still communicating at only 10Mbps. Compa

题目

You are the network administrator for Company.Company has just upgraded its network switches from 10 Mbps to 100 Mbps. After the upgrade， you findthat the 100 Windows 2000 Professional computers on the network are still communicating at only 10Mbps. Company uses NWLink as the only network protocol.You want to enable the computers to communicate at 100 Mbps.What should you do？（）

A、Replace the network adapters with 10/100 Mbps network adapters.
B、Enable TCP/IP on all of the computers on the network.
C、Configure the NWLink frame type of the network adapters to be Ethernet II.
D、Configure the NWLink frame type of the network adapters to be Ethernet 802.3.

如果没有搜索结果或未解决您的问题，请直接联系老师获取答案。

相似问题和答案

第1题：

You are the administrator of a Windows 2000 network. Your network includes 75 Windows NT Workstation 4.0 computers. You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically.

You are using a RIS image to deploy Windows 2000 Professional to the 50 computers. You successfully install Windows 2000 Professional on the first 10 computers. However, you cannot install Windows 2000 Professional on remaining 40 computers.

What should you do?

A．Configure the DHCP scope to add additional IP addresses.

B．Run Rbfg.exe from the RemoteInstall\Admin folder on the RIS server.

C．Modify the startup sequence in the CMOS of the remaining computers.

D．Create computer accounts on the remaining computers in the Active Directory.

正确答案：A
解析：Explanation: RIS requires Active Directory, DNS and DHCP. The clients can either be PXE-compliant or they can use a Remote boot diskette. In this scenario, the DHCP server has run out of IP-addresses. By extending the scope by 40 IP addresses the installation on the remaining computers will be successful.

Incorrect Answers:
B: Rbfg.exe is used to create Remote Boot disks for computers that do not have PXE-compliant network cards. In this scenario, all clients are PXE-compliant and will thus be able to boot through the network and access the RIS image. It is thus not necessary to create Remote Boot disks.

C: The 50 new computers have identical hardware. There installation worked on 10 of the new computers. There can thus be no incorrect startup sequence setting in CMOS.

D: In this situation there is no need for prestaged computer accounts in Active Directory. Pre-staged computer accounts are used to select between RIS servers. By configuring the RIS server to answer only known client computers it would require user accounts for all RIS clients. This is not the default setting.

第2题：

You are the network administrator for Company. Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers to the network. You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet. You run the ipconfig command to examine the UP address on one of the new computers. The IP address is 169.254.101.72 You want to enable the Windows 2000 Professional computers to communicate outside their own subnet. What should you do?（）

A、Install a DHCP server.
B、Install a WINS server. Configure each computer to use WINS.
C、Create an Lmhost file on each computer.
D、Create a Hosts file on each computer.

正确答案:A

第3题：

You are the administrator of your company's network. Your network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations.

You want to accomplish the following goals:

1. An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.

2. Existing user environments will be maintained on the Windows 2000 Professional computers.

3. The network name of each Windows 2000 Professional computer will be changed to match its asset tag.

4. The RIS image and the upgraded applications will be enabled as they are added to the network.

You take the following actions:

1. Install the RIS image on a Windows 2000 Professional computer named Computer1.

2. Install the upgraded applications on Computers1.

3. Change the network name of Computer1 to %DMI-SERIAL_NUM%.

4. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server.

5. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server.

Which result or results do these actions produce? (Choose all that apply.)

A．An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.

B．Existing user environments will be maintained on the Windows 2000 Professional computers.

C．The network name of each Windows 2000 Professional computer will be changed to match its asset tag.

D．The RIS image and the upgraded applications will be enabled as they are added to the network.

正确答案：AD
解析：Explanation: The following steps are taken:
The RIS image is created then the applications are installed on Computer1 before the new RIS image was created using the RIPrep utility. All the applications will be included in this image. Furthermore, you have loaded the new RIS image on to the RIS server, started all of the Windows 2000 Professional computers, and then loaded the RIS image from the RIS server. Unattended installations of the upgraded applications will thus be performed.

Incorrect answers:

B: The hard drives on the computers are overwritten when the new RIS image is loaded. Therefore the existing user environments will not be maintained but will be replaced.

C: No special action is taken to handle the naming of the Windows 2000 Professional computers. The renaming of Computer1 to %DMI_SERIAL_NUM% does not accomplish the naming of the Windows 2000 Professional computers.

第4题：

You are the administrator of Company.com’s Windows 2000 Network. Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are in the Company.com domain. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address, a gateway address and a subnet mask on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）

A、Configure a HOSTS file.
B、Configure a LMHOSTS file.
C、Configure a WINS server database.
D、Configure a DHCP server address.
E、Configure at least one DNS address.

正确答案:A,E

第5题：

You are a network administrator for your company. All domain controllers run Windows Server 2003. The network contains 50 Windows 98 client computers， 300 Windows 2000 Professional computers， and 150 Windows XP Professional computers. According to the network design specification， the Kerberos version 5 authentication protocol must be used for all client computers on the internal network. You need to ensure that Kerberos version 5 authentication is used for all client computers on the internal network. What should you do？（）

A、 On each domain controller， disable Server Message Block （SMB） signing and encryption of the secure channel traffic.
B、 Replace all Windows 98 computers with new Windows XP Professional computers.
C、 Install the Active Directory Client Extensions software on the Windows 98 computers.
D、 Upgrade all Windows 98 computers to Windows NT Workstation 4.0.

正确答案:B

第6题：

You are the administrator of Company.com's Windows 2000 Network. The routed TCP/IP network that you administer consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are members of a single Windows 2000 domain named Company.com. TCP/IP is the only network protocol used at Company's office. You have recently installed 10 new Windows 2000 Professional computers and you want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address and a gateway address on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）

A、Configure a DNS suffix.
B、Configure a subnet mask.
C、Configure an LMHOSTS file.
D、Configure an Interface metric.
E、Configure at least one DNS address.

正确答案:B,E

第7题：

Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）

A、The bindings.
B、A DNS address.
C、A Gateway address.
D、A WINS server address.
E、A DHCP server address.

正确答案:C,D

第8题：

You are the administrator of a Windows 2000 Active Directory network. The network consists of a single domain. The domain includes 20 Windows NT Workstation 4.0 client computers. All other client computers are Windows 2000 Professional computers.

You create a Windows NT 4.0 default user policy on the Windows 2000 Server computer that is configured as the PDC emulator. This default user policy denies access to Network Neighborhood. You then install Terminal Services on one of the servers and Terminal Services Client on the 20 Windows NT Workstation client computers.

You find that the users of the Terminal Server can still browse the network when they open My Network Places. You want to prevent all users from browsing the network.

What should you do?

A．Modify the Windows NT policy template file so that you can restrict access to both My Network Places and Network Neighborhood. Save the policy file on the Terminal Server.

B．Copy the Windows NT policy file to the 20 Windows NT Workstation computers.

C．Create a Windows 2000 Group Policy that denies user access to My Network Places.

D．Edit the local registry on the Windows NT Workstation computers to deny access to Entire Network in Network Neighborhood.

正确答案：C
解析：Explanation: Windows NT 4.0 system polices affect computers running Windows NT 4.0. The Windows NT computers in this scenario are being used as Terminals for the Windows 2000 Server computer that is running Terminal Services. In effect the Windows NT clients are running locally on the Windows 2000 Server. The restriction must be applied on the Windows 2000 Server. This can be done by using a group policy.

Incorrect answers:
A: System policy templates only affect Windows NT 4.0 computers. The restriction must be applied on the Windows 2000 Server.

B: Windows NT policies only affect Windows NT 4.0 computers. The restriction must be applied on the Windows 2000 Server.

D: The NT clients are running locally on the Windows 2000 Server. The restriction must be applied on the Windows 2000 Server.

第9题：

You are the administrator of your company’s network. You network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations. You want to accomplish the following goals: An unattended installation of the upgraded applications will be performed on the Windows 20000 Professional computers. Existing user environments will be maintained on the Windows 2000 Professional computers. The network name of each Windows 2000 Professional computer will be changed to match its asset tag. The RIS image and the upgraded applications will be enabled as they are added to the network. You take the following actions: Install the RIS image on a Windows 20000 Professional computer named Computer1. Install the upgraded applications on Computers1. Change the network name of Computer1 to %DMI-SERIAL_NUM%. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server. Which result or results do these actions produce?（　）

A、An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.
B、Existing user environments will be maintained on the Windows 2000 Professional computers.
C、The network name of each Windows 2000 Professional computer will be changed to matchIts asset tag.
D、The RIS image and the upgraded applications will be enabled as they are added to the N.etwork.

正确答案:A,D

第10题：

You are the administrator of ExamSheet.net's network. ExamSheet upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings so that IP and DNS addresses are obtained automatically. When you restart the computer you cannot access the network. When you attempt toPINGaddress 127.0.0.1 you receive the following error message: "Request timed out." You want this computer to communicate on the network. What should you do?（）

A、Configure IP address settings manually.
B、Replace the network adapter.
C、Disable TCP/IP filtering for all network adapters.
D、Configure DNS server address settings manually.
E、Enable IEEE 802.1x authentication.

正确答案:B

You are the network administrator for Company.Company has just upgraded its network switches from 10 Mbps to 100 Mbps. After the upgrade， you findthat the 100 Windows 2000 Professional computers on the network are still communicating at only 10Mbps. Compa

题目

相似问题和答案

更多相关问题

相关内容