A customer is purchasing a 12-way p5-570 to run light development workloads on eight AIX 5.3 partitions with two network adapters each. When the current network configuration was reviewed， it was discovered that they only have four Ethernet ports available on their network switch. Which of the following solutions would prevent them from having to buy another network switch or hub？（）
第1题：
Companycom wants to reduce the number of copper, Ethernet adapters on their 4 way p5 570 running AIX 5.3 used in each of the four LPARs. Companycom has one database LPAR, two application LPARs, and one web LPAR. Only the Web LPAR needs to communicate with the outside world. What is the minimum number of Ethernet adapters that should be provided to ensure redundancy and no single point of failure?（）
第2题：
An HACMP cluster is planned for two logical partitions on IBM p690 servers. Both partitions have three network interface adapters： two service adapters on a production network connected to an IP switch， and an administration adapter on a stand-alone hub that is connected to the p690 server’s HMC. Non-IP hearbeat paths cannot be configured due to the available hardware in the p690 servers. Given the resources available，what is the best configuration for this cluster？（）
第3题：
A customer wants to run eight production partitions each with the following： ？ 0.7 CPU 1.65-GHz ？ 4GB of RAM ？ 2 Ethernet adapters They do not have room for many RIO drawers since rack space is currently scarce in their data center. They have significant unused SAN attached disk. In addition to the Advanced POWER Virtualization feature， which of the following is the minimum recommended configuration needed to meet the customer’s requirements？（）
第4题：
A small organization is purchasing a POWER5 to consolidate four applications. Currently， each application has two Host Bus Adapters （HBA） connected to an Enterprise Storage Server （ESS）. The customer is concerned about the cost of purchasing eight new HBAs. Which feature of virtualization will be most beneficial to this organization？（）
第5题：
A customer wants to increase the performance of an existing server. They are running a very network intensive application and feel that increasing the bandwidth to the network will fix their problem. They are running two 24-port autosensing 10/100 hubs， tied together with a standard Ethernet crossover cable in port 24. The server is running IPX. After adding a second network card and plugging one card into each hub， they have not seen any performance improvement. Which two are likely reasons why implementing network adapter teaming has not improved performance？（）
第6题：
A small IT department is deploying Power 720 servers exploiting virtualization technologies. Each Power 720 will have two partitions， one with 6 cores and one with 2 cores， and both partitions having 32GB of memory each. Live Partition Mobility is being considered at some point in the future. What is the minimum AIX Edition required to support the customer？（）
第7题：
A customer has a requirement to eliminate single points of failure for an application. They have allocated one Ethernet adapter to each VIO server on the system. Which features of PowerVM and AIX will support the customer requirement？（）
第8题：
Node ’A’ and ’B’ have two network adapters connected to different networks. Adapter 1 is assigned the address 192.168.0.10 with a subnet mask of 255.255.255.0. Adapter 2 is assigned the address 24.76.1.200 with a subnet mask of 255.255.240.0. What is the minimum number of additional adapters per node required to eliminate a network adapter as a single point of failure？（）
第9题：
A customer has an 8-way p5-570 with eight internal disk drives and AIX 5.2. Which of the following must be added， if anything， to the configuration to support four LPARs， assuming each LPAR requires twodisk drives？（）
第10题：
During Company.com planning session，Company.com presents the details of the current Network design. The network design serves four separate company facilities， each on as separate subnet. As part of a disaster recovery plan， the customer is evaluating the use of HACMP. Specifically， the have reviewed IPAT via IP aliasing and are questioning the number of IP subnets required. Given the customer’s current configuration，what is the recommended minimum number of IP subnets that would be required？（）