违法和不良信息举报 联系客服
免费注册 登录

You are not able to telnet to the interface IP address of your device from a PC on the same subnet. What iscausing the problem？（）A、Telnet is not being permitted by self policy.B、Telnet is not being permitted by security policy.C、Telnet is not allowed beca

题目

You are not able to telnet to the interface IP address of your device from a PC on the same subnet. What iscausing the problem？（）

  • A、Telnet is not being permitted by self policy.
  • B、Telnet is not being permitted by security policy.
  • C、Telnet is not allowed because it is not considered secure.
  • D、Telnet is not enabled as a host-inbound service on the zone
如果没有搜索结果或未解决您的问题，请直接 联系老师 获取答案。
相似问题和答案

第1题：

Click the Exhibit button.Referring to the exhibit, you are not able to telnet to 192.168.10.1 from client PC 192.168.10.10.What is causing the problem?()

A. Telnet is not being permitted by self policy.

B. Telnet is not being permitted by security policy.

C. Telnet is not allowed because it is not considered secure.

D. Telnet is not enabled as a host-inbound service on the zone


参考答案：D

第2题：

After attempting to telnet into a router, you are denied and you receive the error message "password required, but none set." What configuration changes will allow telnet access into this router?()

A.

B.

C.

D.


参考答案：C

第3题：

“这个不允许寄往国外”可用以下()英语表达。

A.It is not allowed to be mailed abroad.

B.It is not prohibited from being posted.

C.It is prohibited from being posted.

D.You are not permitted to mail this abroad.


正确答案：ACD

第4题：

You are not able to telnet to the interface IP of your JUNOS software with enhanced services devicefrom a PC on the same subnet. What is causing the problem? （）

  • A、Telnet is not being permitted by self policy.
  • B、Telnet is not being permitted by security policy.
  • C、Telnet is not allowed because it is not considered secure.
  • D、Telnet is not enabled as a host-inbound service on the zone.

正确答案:D

第5题：

Which of the following is not a valid reason for a packet to be punted？（）

  • A、The TCAM has reached capacity
  • B、An unknown destination MAC address
  • C、A packet being discarded due to a security violation
  • D、A Telnet packet from a session being initiated with the switch
  • E、Routing protocols sending broadcast traffic
  • F、A packet belonging to a GRE tunnel

正确答案:B,C

第6题：

You are not able to telnet to the interface IP of your JUNOS software with enhanced services devicefrom a PC on the same subnet. What is causing the problem? ()

A. Telnet is not being permitted by self policy.

B. Telnet is not being permitted by security policy.

C. Telnet is not allowed because it is not considered secure.

D. Telnet is not enabled as a host-inbound service on the zone.


参考答案：D

第7题：

You‘re the systems administrator at Testing, and you create the following access control lists.You then enter the command "ip access-group 101 in" to apply access control list 101 to router TK1s e0 interface.Which of the following Telnet sessions will be blocked as a result of your access lists?（）

A. Telnet sessions from host A to host 5.1.1.10

B. Telnet sessions from host A to host 5.1.3.10

C. Telnet sessions from host B to host 5.1.2.10

D. Telnet sessions from host B to host 5.1.3.8

E. Telnet sessions from host C to host 5.1.3.10

F. Telnet sessions from host F to host 5.1.1.10


参考答案：D, F

第8题：

You are unable to telnet to a router at address 203.125.12.1 from a workstation with the IP address 203.125.12.23. You suspect that there is a problem with the IP protocol stack in your PC. Which of the following actions is most likely to confirm your diagnosis?

A. ping 127.0.0.0

B. ping 203.125.12.1

C. telnet 127.0.0.1

D. ping 127.0.0.1

E. tracert 203.125.12.1

F. None of the above


正确答案：D
D 解析：Explanation:
Every Windows based PC uses the 127.0.0.1 as the local loopback IP address. Every PC will respond to this local IP address if the TCP/IP stack is correctly installed and running on the machine. If you cannot ping the loopback address of 127.0.0.1, then something is wrong with the TCP/IP protocol stack

第9题：

You are unable to telnet to a router at address 203.125.12.1 from a workstation with the IP address 203.125.12.23. You suspect that there is a problem with your protocol stack. Which of the following actions is most likely to confirm your diagnosis?（）

  • A、ping 127.0.0.0
  • B、ping 203.125.12.1
  • C、telnet 127.0.0.1
  • D、ping 127.0.0.1
  • E、tracert 203.125.12.1

正确答案:D

第10题：

You issue the command telnet interface ge-1/1/0 10.10.10.1 source 192.168.100.1 bypass-routing. Which statement is correct?（）

  • A、The bypass-routing parameter is ignored when using private IP addressing.
  • B、The telnet session will have the source IP address 10.10.10.1.
  • C、The telnet session will connect to the neighboring device's interface ge-1/1/0.
  • D、Return traffic for the telnet session might not arrive at interface ge-1/1/0.

正确答案:D

更多相关问题
相关内容