Which statement is true regarding the password-recovery process?()A、You must have a console connection.B、You cannot set the console port to an insecure mode.C、You must press the Enter key so that you can boot into single-user mode.D、When prompted to enter

题目

Which statement is true regarding the password-recovery process?()

  • A、You must have a console connection.
  • B、You cannot set the console port to an insecure mode.
  • C、You must press the Enter key so that you can boot into single-user mode.
  • D、When prompted to enter the full pathname of the shell, you must press the Enter key.
如果没有搜索结果或未解决您的问题,请直接 联系老师 获取答案。
相似问题和答案

第1题:

Which statement is true regarding syslog on Junos devices?()

A. No logging is enabled by default.

B. By default, the information is stored in a file named events.

C. Only the message severity level must be configured.

D. You can configure the router to send log messages to the console.


参考答案:D

第2题:

A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches.Which of the following must you do to accomplish this?()

A. You must set each end of the trunk line to IEEE 802.1e encapsulation.

B. You must set the same VTP management domain name on both switches.

C. You must set all ports on the two switches as access ports.

D. You must configure one of the switches as a VTP server.

E. You must use a rollover cable to connect the two switches.


参考答案:B, D

第3题:

A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).

A.You must set each end of the trunk line to IEEE 802.1e encapsulation.

B.You must set the same VTP management domain name on both switches.

C.You must set all ports on the two switches as access ports.

D.You must configure one of the switches as a VTP server.

E.You must use a rollover cable to connect the two switches.


正确答案:BD
解析:Explanation:ThefollowingdescribeswhatisneededinordertocorrectlysetupVTP:IncorrectAnswers:A.TheencapsulationcanbeeitherISLor802.1Q,andneedtomatchateachendofthetrunk.C.PortsmustonlybeassignedtoVLANS.Oncethatisdoneandthetrunkisupandrunning,theVLANinformationwillbepassedbetweentheswitches.E.AregularCAT5cableisusedtoconnecttheswitches,assuming10/100Ethernetisused.

第4题:

Your home computer runs Windows 2000 Professional. You have just installed a new application and restarted the computer. During the boot process you receive the following error message: "NTLDR is missing - Press any key to restart." You do not have an emergency repair disk. You want your computer to start properly. You want to do this with the least amount of administrative effort.  What should you do?()

  • A、Reinstall the operating system.
  • B、Start the computer by using the Windows 2000 Professional CD-ROM.
  • C、Select Repair option and choose the option to verify system files.
  • D、Start the recovery console and type Diskpart from the command prompt.
  • E、Start the recovery console and enter Fixmbr from the command prompt.

正确答案:B,C

第5题:

Which statement is true regarding syslog on Junos devices?()

  • A、No logging is enabled by default.
  • B、By default, the information is stored in a file named events.
  • C、Only the message severity level must be configured.
  • D、You can configure the router to send log messages to the console.

正确答案:D

第6题:

You are investigating routing problems on a device running the Junos OS. You receive the error shown in the exhibit when you attempt to restart the routing process.Which statement describes the problem?()

A. You have typed an invalid command.

B. You must be in configuration mode to restart the routing process.

C. You do not have permission to restart the routing process.

D. You must wait until close of business to restart the routing process, based on user-defined policy.


参考答案:C

第7题:

You are berthed at a cargo facility where you have just completed discharging a dangerous cargo from your barge.You must complete topside repairs on the barge involving hot work before sailing.Which statement is TRUE ________.

A.You can make repairs with permission of the facility owner since you are empty and the cargo is on the facility

B.The repair area must be inspected by a marine surveyor to ensure that it can be done safely

C.Hot work repairs at such a facility are prohibited

D.The Captain of the Port may give specific approval to make hot work repairs


正确答案:D

第8题:

Which statement is true when you enable SSL for the WebUI?()

A. SSL is enabled for the WebUI by default.

B. You must address the WebUI using HTTPS://.

C. You must change the WebUI port when enabling SSL.

D. The demokey and democert are applied to the WebUI by default.


参考答案:B

第9题:

Which statement is true regarding the password-recovery process?()

  • A、You must have a console connection
  • B、You cannot set the console port to an insecure mode
  • C、You must press the Enter key so that you can boot into single-user mode
  • D、When prompted to enter the full pah name of the shell you must press the Enter key

正确答案:A

第10题:

You have an Exchange Server 2010 organization.You need to limit the size of the items in a public folder.The solution must affect only one public folder.Which tool should you use?()

  • A、Exchange Control Panel (ECP)
  • B、Exchange Management Console (EMC)
  • C、Microsoft Office Outlook
  • D、Public Folder Management Console

正确答案:D

更多相关问题