客户的路由器通过DCC的方式接入运营商网络,那么在路由器上如下哪些接口可以实现DCC拨号?()A、Dialer interfaceB、Serial interfaceC、Async interfaceD、PRI interface

题目

客户的路由器通过DCC的方式接入运营商网络,那么在路由器上如下哪些接口可以实现DCC拨号?()

  • A、Dialer interface
  • B、Serial interface
  • C、Async interface
  • D、PRI interface
参考答案和解析
正确答案:A,B,C,D
如果没有搜索结果或未解决您的问题,请直接 联系老师 获取答案。
相似问题和答案

第1题:

Router R1, a branch router, connects to the Internet using DSL. The engineer plans to use a configuration with a dialer interface. The answers list a feature and interface on which the feature could be configured.Which combinations accurately describe the interface under which a feature will be configured?()

A. PPP on the ATM interface

B. VPI/VCI on the dialer interface

C. IP address on the ATM interface

D. CHAP on the dialer interface


参考答案:D

第2题:

某路由器通过Serial1/0接口连接运营商网络,要在此路由器上配置默认路由从而实现访问Internet的目的,如下哪些配置一定是正确而且有效的?()

  • A、iproute-static0.0.0.00Serial1/0
  • B、iproute-static0.0.0.00.0.0.0Serial1/0
  • C、iproute-static255.255.255.2550.0.0.0Serial1/0
  • D、以上配置都不正确

正确答案:D

第3题:

哪条命令可以显示路由器上说有接口的统计信息()。

A.list interface

B.show interface

C.Show processes

D.Show statistics


参考答案:B

第4题:

Router R1, a branch router, connects to the Internet using DSL. The engineer plans to use a configuration with a dialer interface. The answers list a feature and interface on which the feature could be configured. Which combinations accurately describe the interface under which a feature will be configured?()

  • A、PPP on the ATM interface
  • B、VPI/VCI on the dialer interface
  • C、IP address on the ATM interface
  • D、CHAP on the dialer interface

正确答案:D

第5题:

下列哪些命令可以用来查看DCC端口(在端口S1上配置)信息?()

  • A、display interface
  • B、display current-configuration
  • C、display interfaces1
  • D、display dialer interfaces1

正确答案:D

第6题:

配置DCC的目的是为了实现按需拨号,即只在有数据要发送的时候才开始拨号建立连接,所以要配置一个开始拨号的触发条件的命令是()。

A.acl

B.dialer enable-circular

C.dialer-group

D.dialer-rule


参考答案:C, D

第7题:

在Quidway路由器上如何查看e0IPX接口()

  • A、show interface
  • B、show ipx interface
  • C、show ipx serverce
  • D、show interfacee0

正确答案:B

第8题:

路由器A的配置如下 Quidway#SHOW RUN Now create configuration... Current configuration ! ! interface Ethernet0 ip address 10.2.1.1 255.255.0.0 ! interface Serial0 encapsulation ppp backup interface Serial 1 ip address 2.1.1.1 255.0.0.0 ! interface Serial1 encapsulation ppp ip address 3.1.1.1 255.0.0.0 ! interface Serial2 flowcontrol normal async mode dedicated encapsulation ppp ! Exit Router rip ! End 路由器B的配置如下 Quidway#SHOW RUN Now create configuration... Current configuration ! ! interface Ethernet0 ip address 10.1.1.1 255.255.0.0 ! interface Serial0 encapsulation ppp backup interface Serial 1 ip address 2.1.1.1 255.0.0.0 ! interface Serial1 encapsulation ppp ip address 3.1.1.1 255.0.0.0 ! interface Serial2 flowcontrol normal async mode dedicated encapsulation ppp ! Exit Router rip ! End 下述说法正确的是

A、备份功能可以正常使用 B、备份功能不能正常使用 C、两端可以正常互联 D、两端不能正常互联


正确答案:BCD

第9题:

下列哪些命令可以用来查看DCC端口(在端口S1上配置)信息?()

  • A、display interface
  • B、display current-configuration
  • C、display interface s1
  • D、display dialer interface s1

正确答案:D

第10题:

Based on the following items, which two types of interfaces are found on all network-based IPS sensors?()

  • A、Loopback interface
  • B、Command and control interface
  • C、Monitoring interface
  • D、Management interface

正确答案:B,C

更多相关问题