After upgrading a server motherboard to the latest firmware 

第1题：

An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. Theadministrator powers up the server， during POST the RAID controller is recognized but none of the drivelights flash.  Which of the following should the administrator do FIRST to trouble shoot the problem？（）

• A、 Check the backplane cabling.
• B、 Check the server BIOS.
• C、 Update the RAID controller firmware.
• D、 Install the latest hard drive firmware.

第2题：

When upgrading BIOS firmware, which of the following limits are MOST commonly increased? （）

• A、CPU
• B、USB capacity
• C、Optical drive
• D、RAM

第3题：

第4题：

After a technician installs a new CMOS battery on a motherboard, which of the following will thetechnician have to change? （）

• A、Firmware version
• B、System date/time
• C、Bus speeds
• D、Jumper settings

第5题：

A technician needs to replace the processor on a server’s motherboard. The motherboardsupports Socket 478 processors. Which of the following processors would be compatible with this motherboard？（）

• A、AMD Athlon
• B、Pentium III
• C、Atom
• D、Pentium 4

第6题：

After installing the Windows operating system, Device Manager shows a number of devices with a yellow question mark next to them. Which of the following is the MOST likely reason?（）

• A、The latest service pack needs to be installed.
• B、The created hard drive partition is not large enough.
• C、The motherboard chipset driver needs to be installed.
• D、The processor does not support the Windows OS.

第7题：

A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive.   After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website.   Which action should the technician take next？（）

• A、 backup the BIOS configuration to use later
• B、 install the BIOS update from a command prompt
• C、 create a bootable floppy and copy the BIOS update tools to the floppy
• D、 read the manufacturer’s guidelines and recommendations on installing the update

第8题：

Which of the following will help dissipate heat through the heat sink when upgrading a CPU? （）

• A、Case fan
• B、Thermal compound
• C、Motherboard riser
• D、Power supply

第9题：

Which of the following should be done before and after a service or repair is performed on a server？（）

• A、 Defrag
• B、 IPCONFIG /release
• C、 Firmware update
• D、 Baseline

第10题：

After upgrading a server motherboard to the latest firmware revision， configuring LAN access in the SSU （System Setup Utility） fails. Which action should be taken FIRST to correct this problem？（）

• A、 replace the NIC
• B、 install the latest SSU （System Setup Utility） version
• C、 upgrade the firmware on the NIC
• D、 assign the NIC a static IRQ in the SSU （System Setup Utility）