An administrator is supporting an AIX 6.1 LPAR remotely and 

第1题：

An administrator has implemented the following LPARs on a Power 570 with 32 GB memory with 512 MB remaining for allocation： LPAR 1 memory ： min = 10 GB des = 15 GB max = 24 GB  LPAR 2memory ： min = 10 GB des = 15 GB max = 24 GB The administrator receives a request to add 2 GB to LPAR 1. The only way to do this is by moving memory from LPAR 2 to LPAR 1. The administrator attempts to move the memory， but the operation fails. The administrator can  however allocate 512 MB that is free to LPAR 1 on the 570.  What is the most likely cause of this failure when dynamically moving memory？（）

• A、 Maxperm% is set too low on LPAR 2
• B、 Insufficient paging space on LPAR 1
• C、 Service IBM.DRM is unavailable on LPAR 1
• D、 Insufficient pinnable memory frames available on LPAR 2

第2题：

An AIX LPAR has been reconfigured to use direct-attached disks. What is the best way to fully remove and delete the Virtual IO volumes?（）

• A、On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi#
• B、On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name
• C、On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi# On the VIO Server: rmdev -dev  rootvg_disk, rmlv rootlv_name
• D、On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name On the AIX LPAR: rmdev -dl  hdisk#, rmdev -dl vscsi#

第3题：

第4题：

An administrator plans to use bootable AIX media to boot a system into maintenance mode. The system is running AIX 5.3 TL09 with a64-bit kernel.The administrator has a selection of media available. Which media should the administrator use?（）

• A、AnyAIXbootablemedia，providingitisa64-bitvariant
• B、AnyAIXbootablemedia，providingitisAIX5.1orlater
• C、AnyAIX5.3bootablemedia，providingitisTL09orlater
• D、AnyAIX6.1bootablemedia，providingitisTL02orlater

第5题：

What facilitates the installation of the base fileset for the Data Encryption Standard （DES） Library Routines（）

• A、Fix Central
• B、AIX 6.1 disc
• C、IBM AIX Toolbox
• D、AIX Expansion Pack

第6题：

The administrator changed the number of virtual processors from 1 to 2 in the default_profile of an LPAR. The operator ran thecfgmgr command expecting to see 2 processors after that, but did not see them. What action must be done to apply the changes?（）

• A、Reboot AIX within the LPAR.
• B、Run cfgmgr against the device sys0.
• C、Shutdown and then activate the default_profile.
• D、Ensure the RSCT daemon is operative and run cfgmgr again.

第7题：

Which of the following versions of AIX provide both multi-path I/O and dynamic LPAR？（）

• A、AIX V5.2
• B、AIX V4.2
• C、AIX V4.3
• D、AIX V5.1

第8题：

第9题：

An administrator plans to use bootable AIX media to boot a system into maintenance mode. The system is running AIX 5.3 TL09 with a 64-bit kernel. The administrator has a selection of media available.  Which media should the administrator use？（）

• A、Any AIX bootable media， providing it is a 64-bit variant
• B、Any AIX bootable media， providing it is AIX 5.1 or later
• C、Any AIX 5.3 bootable media， providing it is TL09 or later
• D、Any AIX 6.1 bootable media， providing it is TL02 or later

第10题：

An administrator is installing AIX 6.1 on a new LPAR and the boot sequence has stalled with reference code 0c31. What is the most likely cause?（）

• A、The system is waiting for user input to define console type lft0.
• B、The system is waiting for user input to define console type tty0.
• C、The system is waiting for user input to define console type vty0.
• D、The system is waiting for user input to define console type vsa0.