A technician needs to change an existing drive formatted in

第1题：

第2题：

A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive.   After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website.   Which action should the technician take next？（）

• A、 backup the BIOS configuration to use later
• B、 install the BIOS update from a command prompt
• C、 create a bootable floppy and copy the BIOS update tools to the floppy
• D、 read the manufacturer’s guidelines and recommendations on installing the update

第3题：

第4题：

A user requires more storage space on their computer. After a technician installs a second IDE drive in the computer, the system will not recognize that there are any hard drives installed. Which of the following is the MOST likely cause of the problem?（）

• A、The second hard drive has not been formatted for NTFS.
• B、The jumpers on both drives are set to the cable select position.
• C、The jumper on the first drive is set to master and the second is set to slave.
• D、The jumpers on both drives are set to the master position.

第5题：

A technician needs to change an existing drive formatted in FAT32 to a NTFS format, whileretaining the data. Which of the following is the BEST way to make this change?（）

• A、Use Device Manager to disable the drive, then format it as NTFS.
• B、Use Disk Management to change the format type.
• C、Use Task Manager to start the CHKNTFS command.
• D、Run the CONVERT command from the command prompt

第6题：

A user installed a Blu-Ray drive in their PC. The user reports that the new drive and their existing DVD-RW drive are not operating. Which of the following needs to be replaced?（）

• A、Power supply
• B、DVD-RW
• C、Blu-Ray drive
• D、Motherboard

第7题：

On which of the following hard drive types must Bob, a technician, change the jumper setting to match the motherboard/cabling combination?（）

• A、SATA
• B、eSATA
• C、Solid state
• D、PATA

第8题：

第9题：

A technician wants to use an existing DHCP server for three additional VLANs. Which of the following features needs to be configured to allow for this addition?（）

• A、DHCP server
• B、Proxy server
• C、Repeater
• D、DHCP relay

第10题：

A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer.  Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）

• A、Add another hard drive and use that available space.
• B、Run FDISK.
• C、Use the Disk Management tool.
• D、Back up all important data to an external drive then reformat the hard drive.