Companycom is installing a p5 590 with a HMC to manage LPARs

第1题：

Companycom is installing a p5 595 with AIX 5.3. The DLPAR option for the resources cannot be selected on the HMC menus. However, the daemons are running on both the HMC and LPARs. Which of the following is a prerequisite for DLPAR functionality?（）

• A、The resources must be unallocated in an LPAR
• B、The microcode on the pSeries must be current
• C、All network adapters on the LPAR must be defined
• D、Network connectivity and name resolution capability between HMC and LPARs

第2题：

Companycom recently ordered a p5 570 and an HMC. Prior to delivery, two additional p5 570 servers were added to the order. Upon installation, the system administrator noticed that they do not have a method to connect the p5 570 servers to the HMC. Which of the following will allow them to connect all servers to the HMC?（）

• A、An 8-port adapter to the HMC
• B、A hub for the private network
• C、An additional Ethernet card to the HMC
• D、An additional Ethernet card for each partition

第3题：

For the p5 590 and p5 595 servers, the HMC must be directly attached. Why is the use of a private service network between HMC and the p5 590 required?（）

• A、The Bulk Power Controllers are dependent upon the HMC to provide them with DHCP  addresses.
• B、A firewall is required to isolate the private network from any of the open networks to which the HMC is attached.
• C、Network communications can be implemented through an open network. No private network  is required but it is recommended.
• D、All p5 590 and 595 servers are shipped with one service processor card. A private network is  required to manage DHCP addresses.

第4题：

A system administrator is installing a p5 590 server with an HMC. After pulling the websm client down, it is not possible to connect to the HMC. The HMC can be pinged from the client. Which of the following settings should be verified next?（）

• A、The routes on the HMC
• B、The firewall setting of the LAN adapter
• C、The name resolution protocol on the p5 590 server
• D、The subnet mask settings on the Ethernet adapters

第5题：

Companycom has seven days of vmstat data on a p5 590. The server has a total of four test/dev LPARs and 4 production LPARs of one processor each. On the four test/dev LPARs, the data shows 90-95% peak utilizations with a duration of from 5 to 10 minutes. The average utilizations of all LPARs were between 15-30%. All of the applications have different times when they peak.  What is the best configuration to fully utilize the processor resource?（）

• A、Set up the server in SMP mode and use WLM to manage resources effectively
• B、Set up eight dedicated LPARs and use DLPAR to manage resources effectively
• C、Set up a shared pool with eight capped LPARs including production and test/dev
• D、Set up a shared pool with eight uncapped LPARs with priority weight to Production

第6题：

Companycom is installing a p5 590 with a HMC to manage LPARs. The customer is very concerned about security and wants to restrict network traffic that is not necessary. What is necessary for communication between the LPARs and the HMC?（）

• A、An administrative VLAN with port 1808
• B、Port 657 which must remain open to TCP/IP and UDP traffic
• C、Network addresses are provided by DHCP services on the network
• D、DHCP on the HMC is required to be on to communicate between LPAR and HMC

第7题：

Companycom is considering a partitioned solution which will require cumulative rPerf total of 150. The original sizing came back recommending a 32-way p5 590. However, they have a requirement for future scalability and availability is important. Which of the following would be the best reason to recommend a p5 595?（）

• A、The p5 595 would allow for COD
• B、The p5 595 includes the Advanced Power Virtualization hardware and software
• C、The p5 595 is priced the same as the p5 590 given the same number/type of CPUs
• D、The p5 595 performance would be equivalent to the p5 590 given the same number/type of CPUs

第8题：

Companycom has seven days of vmstat data on four p5 590 production LPARs of four processors each. The data shows that all four LPARs have periodic utilizations of 90-95% lasting several minutes in duration. However, the average utilizations of the four LPARs were between 15-30%. The vmstat data shows that the peak utilizations of each LPAR do not occur at the same time. Which of the following should be set up?（）

• A、A shared pool with four capped LPARs
• B、A shared pool with four uncapped LPARs
• C、Four dedicated LPARs and use DLPAR to manage resources effectively
• D、The server in SMP mode and use WLM to manage resources effectively

第9题：

Companycom has several CR3 HMCs managing their p690 servers. They have purchased a new p5 570 and would like to manage the new system with an existing HMC. What is required to support this environment?（）

• A、Free up one HMC and update the software for use with the p5 570
• B、Connect the new p5 570 server to an existing HMC and manage the p690s and p5 570 from that HMC
• C、Order a new HMC to support the new p5 570 server since the CR3 HMC is not supported for a p5 570
• D、Backup the HMC to DVD-RAM and select HMC migrate to move all the profile data to the new HMC software

第10题：

Companycom currently has three p650 servers in their environment and they are implementing a p5 595. The p650 servers are running in an SMP environment, but are connected to a pair of HMCs. In order to follow best practices in the enterprise server environment and maintain HMC connectivity to the p650s, what else will needs to be ordered in addition to the p5 595?（）

• A、Include a new HMC in the order to connect to the p5 595
• B、Include a pair of new HMCs in the order to connect to the p5 595
• C、Include a media set for POWER5 HMC in the order to upgrade one of the existing HMC’s to POWER5 capabilities
• D、Include a media set for POWER5 HMC in the order to upgrade both of the existing HMC to  POWER5 capabilities Include a media set for POWER5 HMC in the order to upgrade both of the existing HMC? To POWER5 capabilities