违法和不良信息举报 联系客服
免费注册 登录

You install a SCSI adapter and a SCSI tape drive on your Win

题目
单选题
You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer and Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do?（）
A

Start the computer in Safe Mode. Enable driver signing.

B

Start the computer in Safe Mode. Use Device Manager to remove the SCSI tape device.

C

Start the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.

D

Start the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.

如果没有搜索结果或未解决您的问题，请直接 联系老师 获取答案。
相似问题和答案

第1题：

You install Windows 2000 Professional onto an NTFS partition on your computer. During theinstallation, you manually specify the OEM driver for the tape device SCSI controller. After theinstallation, you run the Winnt32 /cmdcons command. Then you successfully install the latest Windows2000 service pack.Next, you install an updated driver for the tape device SCSI controller. When you restart the system andlog on to the computer, you receive a stop error.You need to restore the functionality of the SCSI controller with the least amount of administrative effort.  What should you do? （）

  • A、Restart the computer in Safe Mode. Reinstall the functional SCSI controller driver. 
  • B、Restart the computer into Recovery Console. Replace the faulty SCSI controller driver with the functional one. 
  • C、Start the computer by using a Windows 2000 Professional disk. Replace the faulty SCSI       controller driver with the functional one. 
  • D、Install a parallel copy of Windows 2000 Professional in a separate folder. Copy the functional  SCSI controller driver into the original system folder, and restart the computer to the previous installation.

正确答案:A

第2题：

You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office.  You install an ISA-based SCSI adapter in your docking station. You insert your computer into the docking station and start the computer. The SCSI adapter is not detected during the startup process.  You start the Add/Remove Hardware wizard. When the wizard process is finished, the SCSI adapter is not listed. You want to allow Windows 2000 Professional to detect the SCSI adapter.   What should you do? （）

  • A、Restart the Add/Remover Hardware wizard.  Manually add the SCSI adapter drivers.
  • B、Restart the computer in safe mode.  Restart the Add/Remove Hardware wizard to detect the SCSI adapter.
  • C、Configure Windows 2000 Professional to use driver signing.  Restart the Add/Remove Hardware wizard to detect the SCSI adapter.
  • D、Copy the SCSI adapter drivers to the Winnt/Driver Cache/i386 folder.  Restart the Add/Remover Hardware wizard to detect the SCSI adapter.

正确答案:A

第3题：

You need to install Windows 2000 Server on one of your older Windows NT Server 4.0 computers. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the server installation by updating the SCSI firmware.

You then start the installation of the Windows 2000 Server operating system. During the next portion of the installation, you receive an error message indicating that no hard disks can be found.

You want to successfully install Windows 2000 Server on the computer.

What should you do? (Each correct answer presents part of the solution. Choose two)

A．Restart the installation by using the Windows 2000 Installation CD-ROM. Press F3 during the text-mode setup.

B．Restart the installation by using the Windows 2000 Installation CD-ROM. Press F6 during the text-mode setup.

C．Restart the installation by using a MS-DOS boot disk with a CD-ROM driver.

D．Insert a disk with the original SCSI firmware.

E．Insert a disk with the OEM SCSI driver.


正确答案：BE
解析：Answer: B, E
Explanation: As soon as your machine boots into the text-based portion of Setup, you may notice a prompt at the bottom of the screen that tells you to press F6 if you need to install additional SCSI or RAID drivers. If you don't want these additional drivers, just wait a few seconds and it will go away. But if your system has a SCSI or RAID controller that you know isn't going to initialize without an OEM-provided driver, you'll need to watch this part of Setup closely and hit F6. You'll need to press F6 at the Press F6 prompt to install the OEM SCSI drivers.
Incorrect answers:

A: F3 is used in registry editing. This is not what is desired in this case.

C: This is unnecessary.

D: The firmware is not the problem in this case.

第4题：

A customer has an x445 and uses the internal LSI adapter to manage two 146GB drives in the chassis.  The customer is noticing performance issues when deploying a database with significant write activity on the internal drives.  Should they consider using a ServeRAID-6M with 256MB of cache instead， and why or why not？（）

  • A、Yes， the internal LSI SCSI adapter has no write cache.
  • B、Yes， the internal LSI SCSI adapter is unreliable.
  • C、No， the downtime to install the card and reformat the drives would be cost prohibitive.
  • D、No， there will be no performance benefit， because drive performance is the bottleneck.

正确答案:A

第5题：

An administrator is up grading the back up server from a single tape drive to a SCSI tape library. The library has been unpackaged， mounted， and the library drivers installed.  Which of the following items should the administrator have to connect the device to the backup server？（）

  • A、 SCSI cable
  • B、 SCSI interface adapter on the tape library
  • C、 SCSI termination card on the server
  • D、 iSCSI cable

正确答案:A

第6题：

Company.com wants to create four partitions on a pSeries p5-570 8-way with one SCSI PCI adapter connected to an external LTO tape drive. The partitions are to be created from an existing system image backup tape.  Which of the following actions will enable the creation of the partitions with minimal intervention？（）

  • A、Install a VIO partition to share the tape drive.
  • B、Purchase three external SCSI adapters and physically move the tape drive when needed.
  • C、Create the partition definitions with the SCSI adapter as a desired resource and use DLPAR commands to move the tape drive.
  • D、Create the partition definitions with the SCSI adapter as a required resource for all partitions and use DLPAR commands to move the tape drive.

正确答案:C

第7题：

HP Library & Tape Tools的功能有（）

  • A、查看autoloader和drive的错误日志
  • B、可以识别出连接主机的所有SCSI 设备
  • C、查看autoloader的详细配置和信息
  • D、升级autoloader和drive的firmware

正确答案:A,C,D

第8题：

Which command enables new devices that are connected to the scsi5 adapter without performing a full scan of the system?()

A.cfgmgr -f scsi5

B.cfgmgr -i scsi5

C.cfgmgr -t scsi5

D.cfgmgr -l scsi5


参考答案：D

第9题：

You ran out of space and added a eighth disk to your SCSI-1 system. When you try to start， the system no longer boots. What is most likely the cause of this problem？（）

  • A、 SCSI-1 supports only 8 devices including the adaptor.
  • B、 SCSI-1 supports only 6 disks per adaptor.
  • C、 There is a SCSI-ID conflict that causes that problem.
  • D、 You forgot to set the SCSI-ID #8 for the new disk.

正确答案:A

第10题：

A client has an existing Logical Partition (LPAR) on a p650 running AIX 5.2 and will be porting this LPAR to a p5 590. A mksysb has been run to tape, and a compatible tape drive is available and allocated to the target LPAR on the p5 590. What additional resource needs to be available on the p5 590?（）

  • A、A CD or DVD with installation media
  • B、An internal SCSI adapter in the target LPAR
  • C、An Ethernet adapter for access to an FTP server
  • D、Advanced Power Virtualization feature of the p5 590

正确答案:A

更多相关问题
相关内容