To avoid damaging the components of a printed circuit board

题目
单选题
To avoid damaging the components of a printed circuit board when testing it with a DC volt-ohmmeter, you should ()
A

ground the board

B

avoid reversing the polarity of the leads

C

isolate sensitive components with heat sinks

D

all of the above

如果没有搜索结果或未解决您的问题,请直接 联系老师 获取答案。
相似问题和答案

第1题:

● Serialization delay and (71) delay are the two components of network delay that are improved by increasing bandwidth. Serialization delay, i.e. the amount of time it takes to put the (72) on the wire, and queuing delay (depth of the queue) are improved by increasing the (73) from a 128Kbps circuit to a T1. However, three other components of delay, routing/switching delay, distance delay, and protocol delay are components that can not be positively affected by an (74) in bandwidth. If the circuits are not over-utilized, then increasing the bandwidth to improve the (75) of the application will only result in an increased bandwidth with no positive effects on performance.


正确答案:B,C,C,A,D

第2题:

A circuit breaker and a fuse have a basic similarity(类似) in that they both ______.

A.can be reset to energize the circuit

B.should open the circuit when overloaded

C.will burn out when an over current flow develops

D.should short the circuit when overloaded


正确答案:B

第3题:

For (71) service, we need a virtual-circuit subnet. Let us see how that works. The idea behind virtual circuits is to avoid having to choose a new (72) for every packet sent. Instead, when a connection is established, a route from the (73)machine to the destination machine is chosen as part of the connection setup and stored in tables inside the (74) That route is used for all traffic flowing over the connection, exactly the same way that the telephone system works. When the connection is released, the virtual circuit is also terminated. With connection-oriented service, each packet carries an (75) telling which virtual circuit it belongs to.

A.connectionless

B.connection-oriented

C.datagram

D.telegram


正确答案:B

第4题:

Which of the following is the term used to describe the aggregation of multiple components to formone logical component?()

  • A、Bonding
  • B、Circuit switching
  • C、CSMA/CD
  • D、Channelization

正确答案:A

第5题:

When weighing anchor in a rough sea,how would you avoid risk of damaging the bow plating ________.

A.Heave it home as fast as you can

B.Heave it home intermittently,between swells

C.Leave the anchor under foot,until the vessel may be brought before the sea

D.Wait for a calm spot between seas,then house it


正确答案:C

第6题:

A technician receives an error message ‘inaccessible boot device’ on their monitor. Which of thefollowing components is causing the issue?()

A. Hard disk drive failure

B. NTLDR file is missing

C. BIOS is corrupted

D. System board failure


参考答案:A

第7题:

A circuit breaker and a fuse have a basic similarity in that they both______.

A.can be reset to energize the circuit

B.should open the circuit when overloaded

C.will burn out when an over current flow develops

D.should short the circuit when overloaded


正确答案:B

第8题:

Catalog sheets submitted with the bid must be “originals” and not copies; drawings, schematics and/or circuit diagrams and printed circuit board diagrams must be ().

A、legislative

B、legionary

C、legible

D、legal


参考答案:C

第9题:

On an ONS 15454 node you can tunnel a(n) ().

  • A、 SDH circuit over a SONET network delivering it as an SDH signal
  • B、 SDH circuit over a SONET network delivering it as a SONET signal
  • C、 SONET circuit over an SDH network delivering it as an SDH signal
  • D、 SONET circuit over an SDH network delivering it as a SONET signal

正确答案:A

第10题:

电子公告牌BBS的正确英语写法是()

  • A、Bulletin Board System
  • B、Buletin Board System
  • C、Bulltin Board System
  • D、Bullitin Board System

正确答案:A

更多相关问题