The internal volume of a cargo hold measured from the inside

A. The summarized address for all internal subnetted addresses.

B. A private IP address assigned to a host on the inside network.

C. A registered address that represents an inside host to an outside network.

D. A unique IP address used on an internal network

E. Non of the above

Sweat damage will occur in a cargo hold containing machinery parts when ______.

A.the outside air is colder than the cargo．

B.the air temperature of the hold is higher than the outside air temperature．

C.the dew point of the hold is higher than the temperature of the cargo．

D.the dew point of the outside air is lower than the temperature of the cargo

The Emergency Position Indicating Radiobeacon on a cargo vessel must be stowed ______.

A.in an inside passageway

B.in an approved bracket

C.so that it is accessible from the bridge of the vessel

D.so that it will float free if the vessel sinks

Bulk cargo refers to ______.

A.cargo which occupies a large volume of space

B.cargo which requires refrigeration

C.cargo which is very dense

D.homogeneous cargo not enclosed in a container

______ refers to the stowage of cargo in a block of two or more adjoining cargo holds with the cargo holds adjacent to the block of loaded cargo holds empty．

A.Alternate hold loading condition

B.Block hold loading condition

C.Part hold loading condition

D.Homogeneous hold loading condition

An inert gas system installed on a tanker is designed to ______.

A.aid in the stripping and cleaning of cargo tanks

B.increase the rate of discharge of cargo

C.force toxic and explosive fumes from a cargo tank to vent to the outside atmosphere

D.lower the oxygen levels inside cargo tanks，making explosion nearly impossible

The dangerous semicircle of a typhoon in the Southern Hemisphere is that area ______.

A.measured from due south clockwise 180°

B.measured from due south counterclockwise 180°

C.to the left of the storm's track

D.ahead of the typhoon measured from the storm's track to 90°on each side

What can be used to separate cargo in a hold?

______ is not one of the more commonly adopted solid bulk cargo distributions．

A.Alternate hold loading condition

B.Block hold loading condition

C.Part hold loading condition

D.Inhomogeneous hold loading condition

Molded depth is measured from the ______.

A.inside of the shell

B.outside of the shell

C.top of the center vertical keel

D.top of the garboard stake