more sealing water is needed
the cover clamp needs tightening
the purifier has a bad vibration when started
water is discharged from the overflow line
第1题:
If you suspect a diesel engine is misfiring due to air leakage into the fuel system, you should begin looking for the leak at the
A.fuel line connections to the cylinder injection valves
B.gasket surfaces of the fuel oil filters
C.discharge fittings of the fuel injector pumps
D.suction side of the fuel oil transfer pump
第2题:
Which factor determines the ring dam size for a fuel oil, tubular bowl type, centrifugal purifier?
A.The viscosity of the fuel.
B.The quantity of water to be removed from the fuel.
C.The specific gravity of the fuel.
D.The quantity of dirt to be removed from the fuel.
第3题:
A.It can be applied to separate two liquids
B.It cannot separate solids which contaminated in the oil.
C.It consists of purifier and clarifier
D.The centrifuge arranged to separate two liquids is known as purifier
第4题:
low lube oil temperature
low lube oil pressure
high exhaust temperature
high cooling water pressure
第5题:
When an auxiliary boiler is panting and emitting(发出) black smoke, you should______.
A.increase the fuel oil temperature
B.decrease the fuel oil temperature
C.decrease the fuel oil supply pressure
D.increase the air supply
第6题:
The main propulsion diesel continues running after you try to shut down. You should now attempt to .
A.stop the fuel oil booster pump
B.engage the jacking gear
C.secure the lube oil pump
D.shut off the fuel at the settling tank
第7题:
If the bowl of a disk type centrifugal purifier when operated as a separator is not primed, the
A.oil has a tendency to emulsify in the bowl
B.purifier will act as a clarifier at the discharge ring
C.oil will be lost through the water discharge ports
D.oil solids will be deposited only at the intermediate top disk
第8题:
A.viscosity a heated to reduce its
B.cooled to reduce its temperature
C.heated to reduce its density
D.heated to reduce its gravity
第9题:
close the static leg filling valve
close the overflow tank falling valve
reduce the fuel oil pumping rate
stop the fuel oil pumping operation
第10题:
check the pyrometer readings
check the crankcase oil level
check the fuel oil strainers
clean the fuel system