list to stabilize at an angle of loll
trim to stabilize at an angle of loll
trim to increase
trim to decrease
第1题：
With no environmental forces acting on the vessel，the center of gravity of an inclined vessel is vertically aligned with the ______．
A.longitudinal centerline
B.center of flotation
C.original vertical centerline
D.metacenter
第2题：
Aboard a vessel, dividing the sum of the longitudinal moments by total weight yields the vessel’s ______.
A.inclining moments
B.righting moments
C.vertical moments
D.longitudinal position of the center of gravity
第3题：
Of the following, the most important consideration for a tank vessel is ______.
A.GM
B.the vertical center of gravity
C.the longitudinal center of gravity
D.the stress on the hull
第4题：
In vessel construction, beam brackets are triangular plates that join the deck beam to a ____.
A.bulkhead
B.frame
C.stanchion
D.deck longitudinal
第5题：
For a vessel with longitudinal inclination, an increase in GML causes ______.
A.list to stabilize at an angle of loll
B.trim to stabilize at an angle of loll
C.trim to increase
D.trim to decrease
第6题：
A vessel’s KG is determined by ______.
A.dividing the total longitudinal moment summation by displacement
B.dividing the total vertical moment summation by displacement
C.multiplying the MTl by the longitudinal moments
D.subtracting LCF from LCB
第7题：
For a vessel with list, a decrease in GMT will cause the angle of inclination to ______.
A.stabilize at angle of loll
B.decrease
C.increase
D.remain constant
第8题：
The correction to KG for longitudinal free surface effects for a vessel can be found by dividing the vessel's displacement into the ______．
A.Transverse free surface correction for the vessel
B.Sum of the vertical moments of the vessel
C.Sum of the longitudinal free surface moments of the vessel
D.Longitudinal centerline of the vessel
第9题：
For a vessel with transverse inclination, an increase in GMT causes ______.
A.list to stabilize at an angle of loll
B.trim to decrease
C.list to increase
D.list to decrease
第10题：
Lighter longitudinal stiffening frames on the vessel side plating are called ______.
A.stringers
B.side frames
C.side stiffeners
D.Intercostals