The faying surfaces are coated with white lead（or similar product）before the rivets are set
A sealing weld bead of 1/8 or less pitch is run along the plate edge
The plate edge is split close to an adjacent plate and mechanically forced into contact with the adjacent plate
A properly riveted joint will be watertight; any leakage is stopped by setting up on the rivets
第1题：
What are you recommended to answer the question tell me about yourself, if you are seeking for your first job?
A.Speak much about how that job appeals to you and caused you to apply for it.
B.Speak much about how your enthusiasm about an area has driven you to want that job.
C.Speak much about how a book you’ve read or a person you’ve known motivated you to get that job.
D.Speak much about how your past experiences made you decide to compete for that job.
第2题：
A.is
B.are
第3题：
A、to solving
B、 making
C、 to solving
D、 made
E、 to solve
F、 making
G、 to solve
H、 made
第4题：
Regulations define the bulkhead deck as ______．（subdivision and stability regulations）
A.any deck extending from stem to stern
B.the uppermost deck to which transverse watertight bulkheads extend
C.the lowermost deck to which transverse watertight bulkheads extend
D.the uppermost complete deck
第5题：
The use of liners in riveted construction is eliminated by using ______.
A.lapped construction
B.strapped construction
C.joggled construction
D.belted construction
第6题：
Allowances may be made for the expansion and contraction in piping by the use of expansion joints or ().
A.Unions
B.Retractable flanges
C.Union bulkhead fittings
D.Bends or loops in the line
第7题：
He was in a traffic jam, ( ) made him late for school.
A、that
B、which
C、what
D、how
第8题：
A. in observe
B. observe
C. to observe
D. in observing
第9题：
What is NOT a requirement of cargo piping installed in tank vessels carrying grade D or E cargo ONLY ________．
A.The cargo piping system shall be fixed
B.Flanged joints shall be used for pipe sizes exceeding 2 inches in diameter
C.Piping through bunker spaces may be run through a pipe tunnel
D.Connections at bulkheads must be made so that the plating does not form part of a flanged joint
第10题：
The type of joint formed when an edge of one plate is laid over the edge of the plate to which it is riveted is a ______．
A.Grip joint
B.Strap joint
C.Thread joint
D.Lap joint