liquid strainer
refrigerant inlet of the condenser
inlet side of the evaporator
suction side of the compressor
第1题:
Springs in fuel injectors will become not strong enough to work because______.
A.the injector opens at a lower pressure than designed
B.the needle valve and seat wear out
C.the nozzle holes wear out
D.long time in use
第2题:
A portable dry chemical fire extinguisher discharges by ______.
A.gravity when the extinguisher is turned upside down
B.pressure from a small CO2 cartridge on the extinguisher
C.air pressure from the hand pump attached to the extinguisher
D.pressure from the reaction when water is mixed with the chemical
第3题:
Which of the listed pressure control valves would be used to establish the maximum operating pressure of a hydraulic system?
A.Pressure-reducing valve
B.Unloading valve
C.Counterbalance valve
D.Pressure-relief valve
第4题:
be jammed
be opened
be seated
be broken
第5题:
A relief valve
An alarm
A pressure gauge
A non-maim valve
第6题:
What type of valve is used to direct the flow of hydraulic fluid?
A.relief valve
B.direction control valve
C.stop valve
D.pressure control valve
第7题:
Pressure-reducing valve
Unloading valve
Counterbalance valve
Pressure-relief valve
第8题:
If the head pressure of a reciprocating refrigeration compressor is excessive
A.the relief valve should open before the high pressure cutout
B.the relief valve should open and allow the excess refrigerant to flow to the receiver
C.the high pressure cutout switch should operate before the relief valve opens
D.you should close the discharging valve
第9题:
excessive lube oil pressure
the proper seating of new rings
a worn cylinder liner
a malfunctioning cylinder relief valve
第10题:
control the back pressure of return oil
lock the oil lines under some conditions
change the direction of oil flow
act as relief valve