higher than the actual drum water level
equal to the actual drum water level
increasing due to steam condensation in the glass
lower than actual drum water level
第1题:
A.salinity is abnormally
B.high steam demand is too
C.feed-water flow is low
D.water level is abnormally low
第2题:
what chemicals did you use to treat the boiler water ?when you test alkalinity and acidity of water in boiler by pH test paper ? the result shows the boiler water is in acidiity . please describe what the possible cause is .
第3题:
The correct procedure for giving an auxiliary boiler a bottom blow, is to begin .
A.when the boiler has been secured long enough for most solids to settle
B.when the boiler has been cooled to ambient temperature
C.only after raising the water level to within 0.5 inch of the high water cutout only
D.after bypassing the low pressure
第4题:
descriptions
discrepancies
different
deflections
第5题:
There is()water in the glass, is there?
Aa few
Bnot
Cfew
Dlittle
第6题:
The water level showing in a boiler water gauge glass is usually ( ) duringworking.
A.higher than the actual drum water level
B.equal to the actual drum water level
C.increasing due to steam condensation in the glass
D.lower than actual drum wafer level
第7题:
If the feed pump for an auxiliary boiler fails to deliver the feed water to the boiler, the cause may be ______.
A.high steam pressure in the boiler
B.abnormally high feed-water temperature
C.abnormally high boiler water temperature
D.steam demand exceeding feed pump capacity
第8题:
The water level in the gauge glass when a boiler is operating is _____ when the boiler is shut down.
A.lower than
B.higher than
C.below
D.equal to
第9题:
concentrations of calcium sulfate in the boiler water
fuel oil in the feed water
improper treatment of the feed water with calcium sulfate
excessive feed water alkalinity
第10题:
will be modulated in proportion
will be modulated in proportion and integral
will be modulated in proportion and differential
will not be modulated at all