mechanical energy
heat energy
potential energy
kinetic head
第1题:
If a centrifugal pump is driven by a constant speed electric motor and produces a discharge pressure less than designed, the cause is probably ______.
A.excessive pump speed
B.excessive suction head
C.worn wearing rings
D.gross pump misalignment
第2题:
Single stage or multistage
High pressure or low pressure
Open or close coupled
Horizontal or vertical
第3题:
Throttling in the _____ line of a centrifugal pump involves the risk of the pump cavitation.
A.suction
B.exhaust
C.pressure
D.discharge
第4题:
a centrifugal fan
a direct expansion cooler
a hermetic compressor
a centrifugal pump
第5题:
kinetic;pressure
kinetic;essential
pressure;kinetic
pressure;height
第6题:
All of the following steps are taken in starting a centrifugal pump,EXCEPT to ______.
A.Set the relief valve
B.Check the lubrication system
C.Vent the pump casing
D.Open the pump suction and discharge valves
第7题:
Oil is discharged from the impeller through the outlet
Gravity causes the oil to flow toward the discharge
The self-priming feature of the centrifugal pump enables it to draw its own suction as it starts
The discharge capacity varies directly with the speed of the impeller
第8题:
The high air velocity leaving the compressor of an exhaust gas turbocharger is converted to pressure in the_______.
A.inlet nozzle ring
B.turbine wheel blade
C.diffuser passages
D.inlet volute
第9题:
reduce radial thrust to the impeller
double the liquid velocity through the pump when compared to a single volute
reduce hydraulic end thrust
provide the effect of multi-staging
第10题:
discharges into a gradually widening channel
has stationary diffuser vanes
produces no kinetic energy
All of the above are true