对
错
第1题:
A.[Quidway]stp port Ethernet0/1 priority priority
B.[Quidway]stp priority priority
C.[Quidway-Ethernet0/1]stp priority port Ethernet0/1 priority
D.[Quidway-Ethernet0/1]stp port priority priority
第2题:
A.错误
B.正确
第3题:
此题为判断题(对,错)。
第4题:
下面是SWC上运行STP的端口的Display信息显示,请根据这些配置信息,判断该端口的角色为()[SWC]display stp interface Ethernet 0/20Port 20(Ethernet0/20) of bridge is ForwardingPort spanning tree protocol:enabledPort role:Designated PortPort path cost:200Port priority:128Designated bridge ID(Pri.MAC):4096.00e0-fc41-4259The Port is a non-edged portConnected to a point-to-point LAN segmentMaximum transmission limit is 3 Packets/hello timeTimes:Hello Time 2 sec,Max Age 20 secForward Delay 15 sec,Message Age 0BPDU sent:4TCN:2,RST:2,Config BPDU:0BPDU received:806TCN:0,RST:11,Config BPDU:795
A.该端口为根端口
B.该端口为指定端口
C.该端口为预备端口
D.以上说法都不正确
第5题:
A.交换设备上启动了BPDU保护功能后,如果边缘端口收到RST BPDU,边缘端口将被设置为非边缘端口,并重新进行生成树计算
B.启用Root保护功能的指定端口,其端口角色只能保持为指定端口
C.在启动了环路保护功能后,如果根端口或Alternate端口长时间收不到来自上游的RST BPDU时,阻塞端口会迁移到Forwarding状态
D.启用防TC-BPDU报文攻击功能后,在单位时间内,交换设备处理TC BPDU报文的次数可配置
第6题:
A.错误
B.正确
第7题:
A.Bridge Priority(交换机优先级)
B.Hello Time(根桥交换机向外发送配置报文的时间间隔)
C.Max Age Time(最大老化时间)
D.Forward Time(端口状态转换时间)
E.Port Path Cost(端口路径值)
F.Port Priority(端口优先级)
第8题:
A.Priority(master)>Priority(backup)>Priority(master)-Priority(reduced)
B.Priority(master)
C.Priority(master)>Priority(backup)>Priority(reduced)
D.Priority(master)
第9题:
A.在RSTP里面引入了边缘端口的概念,边缘端口不接收处理配置BPDU,不参与RSTP运算,可以由Disable直接转到Forwarding状态
B.如果网络中一个根端口失效,那么网络中最优的Alternate端口将成为根端口,进入Forwarding状态
C.RSTP中,某端口被选举为指定端口后,会先进入Discarding状态,再通过Proposal/Agreement机制快速进入Forwarding状态
D.RSTP中当一个端口收到上游的指定桥发来的RSTBPDU报文时,该端口会将自身存储的RST BPDU与收到的RST BPDU进行比较
E.如果网络中一个指定端口失效,那么网络中最优的Alternate端口将成为指定端口,进入Forwarding状态
第10题:
RSTP计算过程中,当端口收到一个RSTBPDU之后,首先为此RSTBPDU生成一个消息优先级向量(Message Priority Vector),然后使用()和()比较。