A new server must be configured to provide fault tolerant co

第1题：

An administrator buys a new server. The server has four disks and needs to be configured formaximum space. Fault tolerance is not a constraint. Which of the following configurations completes this task？（）

• A、RAID 0
• B、RAID 1
• C、RAID 5
• D、RAID 10

第2题：

The Cisco CRS Server must be configured to communicate and interoperate with the Cisco CallManager. Which two must be configured on the Cisco CRS Server?（）

• A、Application Management to load applications  
• B、JTAPI Subsystem with the JTAPI Call Control Group  
• C、Database Subsystem communication with LDAP Directory  
• D、JTAPI Subsystem with the JTAPI provider  

第3题：

第4题：

A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network. Which of the conditions below have to be met in order for this to occur?（）

• A、The switch that will share the VLAN information must be in the VTP Server mode.
• B、The switches must be in the same VTP domain.
• C、The switch that will share the VLAN information must be configured as the root bridge.
• D、The switches must be configured to use the same VTP version.
• E、The switches must be configured to use the same STP version.
• F、The switches must be configured to use the same type of ID tagging.
• G、The switches must be connected over VLAN trunks.

第5题：

An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）

• A、The switch that will share its VLAN configuration must be in VTP server mode.
• B、The switches must be in the same VTP domain.
• C、The switch that will share the VLAN information must be configured as the root bridge.
• D、The switches must be connected over VLAN trunks.
• E、The switches must be configured to use the same STP version.
• F、The switches must have VTP pruning activated.

第6题：

A new VLAN needs to be created for an existing network. Which of the following are the minimum tasks that must be accomplished in order to create the new VLAN?（）

• A、The VLAN must be created
• B、The VLAN must be named
• C、An IP address and subnet mask must be configured for the new VLAN
• D、The desired ports must be added to the new VLAN
• E、The VLAN must be added to the existing VTP Domain

第7题：

While explaining to a customer the fault tolerant benefits of x445 they ask what happens if they implement memory mirroring and a DIMM fails in the SMP expansion module.  Which of the following is the most appropriate response？（）

• A、The DIMM is taken off line， and fault tolerance is available on the other DIMMs only.
• B、The memory bank is taken offline and rebuilt with the online hot spare and then brought back on line.
• C、The memory bank containing the failed DIMM is taken off line， and the system is no longer fault tolerant until replaced.
• D、The DIMM is taken offline， and the online hot spare is initiated and the system remains fault tolerant.

第8题：

第9题：

Which Cisco CRS 4.0 server configuration task enables the Cisco CRS server to fail over to a secondary Cisco Unified CallManager when the primary Cisco Unified CallManager fails?（）

• A、The LDAP directory must have a secondary profile configured.  
• B、No special configuration is required. Cisco Unified CallManager maintains the failover.  
• C、The JTAPI provider on the Cisco CRS server must be configured with the secondary Cisco Unified CallManager IP address following the primary Cisco Unified CallManager IP address.  
• D、There must be a second JTAPI user configured with an alternate range of CTI ports.

第10题：

A new server must be configured to provide fault tolerant connectivity to the DMZ and the backend database. Which of the following is the MOST cost effective way to accomplish this？（）

• A、A total of six NICs： two pairs of teamed NICs for the DMZ and two NICs for the backenddatabase.
• B、One NIC can be configured with VLANs for the DMZ and backend database.
• C、A total of eight NICs to be teamed with the appropriate VLANs configured for the DMZ andbackend database.
• D、A total of four NICs： two NICs for the DMZ and two NICs for the backend database.