配置UAP3300的主机IP
配置TFTP服务器的IP地址
配置媒体资源的IP地址
配置文件服务器的IP地址
第1题:
在路由器配置中,如果处于“Router(config-if)”模式下,执行( )命令可将路由器切换至“Router(config)”模式。
A.endB.exitC.showD.enable
第2题:
在Windows 2000操作系统中,登陆时使用的用户名对应的密码保存的路径()。
A.C:\WINDOWS\system32\config\SAM
B.C:\WINNT\system32\config\SAM
C.C:\WINDOWS\system\config\SAM
D.C:\WINNT\system\config\SAM
第3题:
下列命令中,无法正确执行的是()
A.Router(config)show run
B.Routerping 127.0.0.1
C.Router(config)hostname cisco
D.Routerreload
第4题:
A.show system information
B.show version
C.display system information
D.display version
第5题:
A.RouterA(config)#encryptedpasswordcisco
B.RouterA(config)#passwordencryptedcisco
C.RouterA(config)#enablepasswordcisco
D.RouterA(config)#enablesecretcisco
E.RouterA(config)#service-passwordencryptioncisco
第6题:
在Windows系统中,当用户选择“config.xml”文件并执行“剪切”命令后,被“剪切”的“config.xml”文件放在( )中。
A.回收站B.剪贴板C.硬盘D.USB盘
第7题:
[说明]
某局域网通过两个路由器划分为3个子网,拓扑结构和地址分配如图5-1所示。
[问题1] (6分)
下面是路由器R1的配置命令列表,在空白处填写合适的命令/参数,实现R1的正确配置,
Router>en
Router>conf term
Router(config)hostname Rl
___(1)___
R1(config-if) ip address 192.168.1.2 255.255.255.0
R1(config-if) no shutdown
R1(config-if)int s0
R1(config-if)ip address ___(2)___
R1(config-if)no shutdown
R1(config-if)clock rate 56000
R1(config-if)exit
R1(config)ip routing
R1(config)ip route 0.0.0.0 0.0.0.0 ___(3)___
R1(config)ip classless
R1(config)exit
R1copy run start
[问题2] (3分)
下面是路由器R2的配置命令列表,在空白处填写合适的命令参数,实现R2的正确配置。
Router>en
Routerconf term
Router(config)hostname R2
R2(config)int e0
R2(config-if)ip address 192.168.3.1 255.255.255.0
R2(config-i0no shutdown
R2(config-if)int s0
R2(config-if)ipaddress 192.168.2.2 255.255.255.0
R2(config-if)no shutdown
R2(config-if) ___(4)___
R2(config)ip roudng
R2(config) ip route 0.0.0.0 0.0.0.0 ___(5)___
R2(config) ip classless
R2(config) exit
R2 copy run start
[问题3] (2分)
在以上配置命令列表中,命令ip routing的作用是什么
[问题4] (2分)
在以上配置命令列表中,命令ip classless的作用是什么
[问题5] (2分)
在以上配置命令列表中,命令copy run start的作用是什么
第8题:
在 Windows 系统中,当用户选择" config.xml" 文件并执行"剪切"命令后,被"剪 切"的“config.xml”文件放在( )中。
A. 回收站B. 剪贴板C. 硬盘D. USB盘
第9题:
A.show system information
B.show user
C.show subscriber
D.show sipue
第10题:
A.config system ip 10.69.18.5/24
B.config system ip 10.69.18.5 netmask 255.255.255.0
C.config modify system ip 10.69.18.5/24
D.config modify system ip 10.69.18.5 netmask 255.255.255.0