Use the custom application feature.
Configure static NAT for the host.
Use port address translation (PAT).
Use the address-persistent option.
第1题：
A network administrator repeatedly receives support calls about network issues. After investigating the issues, the administrator finds that the source NAT pool is running out of addresses.To be notified that the pool is close to exhaustion, what should the administrator configure?（）
A. Use the pool-utilization-alarm raise-threshold under the security nat source stanza.
B. Use a trap-group with a category of services under the SNMP stanza.
C. Use an external script that will run a show command on the SRX Series device to see when the pool is close to exhaustion.
D. Configure a syslog message to trigger a notification when the pool is close to exhaustion.
第2题：
A. interface-based source NAT
B. source NAT with address shifting
C. source NAT using static source pool
D. interface-based source NAT without PAT
E. source NAT with address shifting and PAT
第3题：
The Ezonexam network administrator wants to ensure that only a single web server can connect to pot Fa0/1 on a catalyst switch. The server is plugged into the switch's Fast Eth. 0/1 port and the network administrator is about to bring the server online. What can the administrator do to ensure that only the MAC address of this server is allowed by switch port Fa0/1? (Choose two)
A．Configure port Fa0/1 to accept connections only from the static IP address of the server
B．Configure the MAC address of the server as a static entry associated with port Fa0/1
C．Employ a proprietary connector type on Fa0/1 that is incomputable with other host connectors
D．Configure port security on Fa0/1 to reject traffic with a source MAC address other than that of the server
E．Bind the IP address of the server to its MAC address on the switch to prevent other hosts from spoofing the server IP address
第4题：
Interface ge-0/0/2.0 of your device is attached to the Internet and is configured with an IP address and network mask of 71.33.252.17/24. A Web server with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. The Web server is attached to the ge-0/0/0.0 interface of your device. You must use NAT to make the Web server reachable from the Internet using port translation. Which type of NAT must you configure?（）
第5题：
A. source and destination MAC address
B. source MAC address and destination network address only
C. source and destination network address only
D. source network address and destination MAC address
E. source and destination MAC address and source and destination network address
第6题：
A network administrator wants to permit Telnet traffic initiated from the address book entry the10net in a zone called UNTRUST to the address book entry Server in a zone called TRUST.However, the administrator does not want the server to be able to initiate any type of traffic from the TRUST zone to the UNTRUST zone.Which configuration statement would correctly accomplish this task?（）
A. from-zone UNTRUST to-zone TRUST { policy DenyServer { match { source-address any; destination-address any; application any; } then { deny; } } } from-zone TRUST to-zone UNTRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }
B. from-zone TRUST to-zone UNTRUST { policy DenyServer { match { source-address Server; destination-address any; application any; } then {deny; } } } from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }
C. from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-ftp; } then { permit; } } }
D. from-zone TRUST to-zone UNTRUST { policy DenyServer { match { source-address Server; destination-address any; application any; } then { permit; } } } from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match {source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }
第7题：
Several reports are logged stating that an application server is performing slowly. During the investigation, the administrator notices that the hard drives on the server appear to have a high level of activity.Which items should the administrator monitor using performance monitoring tools?（）
A. Page File
B. Disk Utilization
C. System Temperature
D. Processor Utilization
E. Network Utilization
第8题：
Interface ge-0/0/2.0 of your device is attached to the Internet and is configured with an IP address and network mask of 71.33.252.17/24. A Web server with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. The Web server is attached to the ge-0/0/0.0 interface of your device. You must use NAT to make the Web server reachable from the Internet using port translation.Which type of NAT must you configure?（）
A. source NAT with address shifting
B. pool-based source NAT
C. static destination NAT
D. pool-based destination NAT
第9题：
Several reports are logged stating that an application server is performing slowly. During the investigation， the administrator notices that the hard drives on the server appear to have a high level ofactivity. Which items should the administrator monitor using performance monitoring tools？ （）
第10题：
Interface ge-0/0/2.0 of your device is attached to the Internet and is configured with an IP address andnetwork mask of 71.33.252.17/24. A webserver with IP address 10.20.20.1 isrunning an HTTP service on TCP port 8080. The webserver is attached to the ge-0/0/0.0 interface of yourdevice. You must use NAT to make the webserver reachable from the Internet using port translation.Which type of NAT must you configure？（）