It statically places a host route in the routing table.
It statically associates an IP address with a customer.
It dynamically creates a host route in the routing table.
It dynamically assigns an address to the router's interface
第1题：
A.ip host routes
B.ip access-routes
C.host routes enabled
D.access-routes enabled
第2题：
A.The route is a direct route.
B.The route was selected as active.
C.The route is a default route.
D.The route was learned using a dynamic routing protocol.
第3题：
A. Monitors and manages leases.
B. Creates host route dynamically after address assignment.
C. Provides an IP address from a pool.
D. Must be on same subnet as DHCP server
第4题：
Users on the 172.17.22.0 network cannot reach the server located on the 172.31.5.0 network.The network administrator connected to console port,issued the show ip route command,and was able to ping the server.Based on the output of the show ip route command topology shown in the graphic,what is the cause of the failure?（）
A.IP routing is not enabled
B.A static route is configured incorrectly
C.The network has not fully converged
D.The FastEthernet interface on Coffee is disabled
E.The routing table on Coffee has not updated
F.The neighbor relationship table is not correctly updated
第5题：
The command "ip route 192.168.24.64 255.255.255.192 192.168.8.2 100" was configured on a router named TK1. No routing protocols or other static routes are configured on the Corporate router yet.Based on this information, which statement is true about this command?（）
A. This command sets a gateway of last resort for the TK1 router.
B. The number 100 indicates the number of hops to the destination network.
C. The interface with IP address 192.168.8.2 is on the TK1 router.
D. The command creates a static route for all IP traffic with the source address 192.168.24.64.
E. Packets destined for host 192.168.24.124 will be sent to 192.168.8.2.
F. None of the above
第6题：
A.ip host-route
B.ip access-routes
C.ip dynamic host-route
D.ip route access-routes
第7题：
Enterprise Router R1 connects an Enterprise to the Internet. R1 needs to create and advertise a default route into the Enterprise using EIGRP. The engineer creating the implementation plan has chosen to base this default route on the ip route command, rather than using i p default - network.Which of the following is not a useful step with this style of default route configuration?（）
A. Create the default route on R1 using the ip route 0.0.0.0 0.0.0.0 outgoinginterface command.
B. Redistribute the statically configured defa ult route.
C. Disable auto - summary.
D. Configure the network 0.0.0.0 command.
E. Ensure R1 has no manually configured summary routes using the ip summary- address eigrp command.
第8题：
A. ip route 192.168.10.1 255.255.255.255 atm 6/2.1
B. ip route 192.168.10.1 255.255.255.252 atm 6/2.1
C. add route 192.168.10.1 255.255.255.252 atm 6/2.1
D. add route 192.168.10.1 255.255.255.255 atm 6/2.1
第9题：
Refer to the exhibit. IP multicast configuration changes have been made on several routers.However, the IP multicast table displayed in the exhibit still does not reflect the changes. What should be done to display the new routing table information? （）
A. Issue the clear ip route * privileged EXEC command.
B. Issue the clear ip igmp group privileged EXEC command.
C. Issue the no ip mroute - cache privileged EXEC command.
D. Issue the clear ip mroute privileged EXEC command.
第10题：
Which configuration command assigns a host route to the CPE workstation address of 192.168.10.1 in a Bridged 1483 network?（）