You can reach other Level 2 routers.
It can reach at least one other defined area.
The router is reachable by at least two ES-IS nodes.
It has at least one enabled reachable prefix with a valid metric defined.
第1题：
A. Router A must have a Level 2 adjacency with the Level 1/Level 2 router in area 49.0001.
B. The Level 1/Level 2 router in area 49.0001 sets the "attached" bit in the Level 1 link-state PDU (LSP) it floods into area 49.0001.
C. The Level 1/Level 2 router in area 49.0001 sets the "attached" bit in the Level 2 LSP it floods into area 49.0001.
D. The Level 1/Level 2 router in area 49.0001 advertises these prefixes into area 49.0001 using a Level 2 LSP it floods into the area.
第2题：
The number and position of hydrants arranged on board shall be such that _______，one of which shall be from a single length of hose，may reach any part of the ship normally accessible to the passengers or crew while the ship is being navigated．
A.at least two jets of water which shall be from the same length of hose
B.at least two jets of water emanating from the same hydrant
C.at least two jets of water not emanating from the same hydrant
D.at least two jets of water not emanating from the same hydrant，one of which shall be from a single length of hose
第3题：
A multicast router may receive thousands of multicast(71)every day for different groups. If a router has no knowledge about the membership status of the(72), it must broadcast all of these packets. This creates a lot of traffic and consumes(73). A better solution is to keep a list of groups in the network for which there is at least one loyal member.(74)helps the multicast router create and update this list. For each group, there is one router that has the duty of distributing the(75)packets destined for that group. This means that if there are three multicast routers connected to a network, their lists of groupids are mutually exclusive. A host or multicast router can have membership in a group.
A．packets
B．errors
C．reports
D．alarms
第4题：
A database administrator wants to design a multi-partition database that can take advantage of both intra-partition parallelism and inter-partition parallelism. Which configuration will allow the use of these types of parallelism while using the least number of hardware components (servers, processors)? （）
第5题：
Which two are default preference values for both internal and external IS-IS Level 2 routes on a Juniper Networks router?（）
第6题：
A. The ABR must have multiple interfaces connected to the backbone areA
B. An ABR is a router with two interfaces, each connected to a different nonbackbone areA
C. The only requirement to be considered an ABR is at least one interface connected to the backbone areA
D. An ABR must have at least one interface in the backbone area plus at least one other interface in a nonbackbone areA
第7题：
What are two requirements to perform a warm Cisco IOS upgrade on a Cisco ISR router? （）(Choose two.)
第8题：
A. You can reach other Level 2 routers.
B. It can reach at least one other defined area.
C. The router is reachable by at least two ES-IS nodes.
D. It has at least one enabled reachable prefix with a valid metric defined.
第9题：
Which of the following is true about an OSPF area border router (ABR)?（）
第10题：
You have a Level 1-only router (Router A) in IS-IS area 49.0001. How does Router A learn how to get to IP prefixes in other areas?（）