Put the Ethernet adapters in slots 1, 2 and 3. Put the FastT HBA in slot 5. Put the U320 adapter in slot 6.
Put the Ethernet adapters in slots 1, 4 and 6. Put the FastT HBA in slot 5. Put the U320 adapter in slot 3.
Put the Ethernet adapters in slots 1, 2 and 4. Put the FastT HBA in slot 3. Put the U320 adapter in slot 5.
Put the Ethernet adapters in slots 1, 2 and 3. Put the FastT HBA in slot 5. Put the U320 adapter in slot 4
第1题:
You are designing a Windows Server 2008 R2 Hyper-V Virtualization environment. Your host servers must have the following elements: - A dedicated management network adapter. - A dedicated virtual network for child iSCSI network traffic. - A dedicated virtual network for child network traffic with VLAN tagging. You need to choose adapters that minimize the host server processing. Which adapters should you choose?()
第2题:
What is a design consideration when using existing PCIe I/O drawers in a maximum bandwidth/throughput configuration on a new Power 750 system?()
第3题:
A customer uses an IBM xSeries x366 for their network server.They experienced downtime when the NIC failed earlier this year.Their Novell 6.5 server needs to be accessible all the time at the highest speed possible.Slots are available where network adapters can still be added. High availability is the primary requirement, but increased network bandwidth on the server is also required. Which of the following is the most cost-effective solution to satisfy all of the customer’s requirements?()
第4题:
Company.com has I/O slot constraints on two nodes that are going to be configured in an HACMP cluster. There is room for only one Network Interface Card in each node,in addition to the built-in Ethernet port on the system planer. The best HACMP configuration for these servers is to implement:()
第5题:
Company.com is having trouble installing a fresh AIX image onto a newly defined partition on a p5-520. The assignment of the adapters to the each of the partitions is as follows: Fibre Channel Card 01 - partition one - required Fibre Channel Card 02 - partition one - required SCSI adapter 01 - partition one - desired IDE adapter 01 - partition one - required Ethernet adapter 01 - partition one - required Ethernet adapter 01 - partition two - required SCSI adapter 02 - partition two - required IDE adapter 01 - partition two - desired Which of the following actions will enable the installation of the AIX image?()
第6题:
Companycom will be using the Virtual IO Server to share both FC and Ethernet adapters among multiple LPARs. The customer is using mostly web services in the LPARs. Which of the following should be considered?()
第7题:
A FastT Host FC-2 bus adapter, a U320 SCSI adapter, and three 10/100Mb Ethernet adapters have to be installed as optimally as possible. This is going to be a 24X7 system. The addition of extra PCI-cards is a major consideration as well. Based on the following, what is the best configuration?() (1)Slot 1 66MHz Bus 1 (2)Slot 2 66MHz Bus 1 (3)Slot 3 100MHz Bus 2 (4)Slot 4 100Mhz Bus 2 (5)Slot 5 133Mhz Bus 3 (6)Slot 6 133Mhz Bus 3
第8题:
Node ’A’ and ’B’ have two network adapters connected to different networks. Adapter 1 is assigned the address 192.168.0.10 with a subnet mask of 255.255.255.0. Adapter 2 is assigned the address 24.76.1.200 with a subnet mask of 255.255.240.0. What is the minimum number of additional adapters per node required to eliminate a network adapter as a single point of failure?()
第9题:
A server has two PCI-X buses with four Active PCI-X slots. Slots 1 and 2 are on the first PCI-X bus (100MHz) and slots 3 and 4 are on the second PCI-X bus (133MHz). The customer requires you to install adapter A and adapter B on day one. After the server has been installed and configured, the server must be running 24 by 7 with no downtime. Three months later, adapter C needs to be hot added. All the adapters are 64-bit and capable of speeds up to 133MHz. The customer’s priority is to have no downtime, and performance is secondary. Based on the information provided, into which slots should adapters A and B be installed in and later into which slot would adapter C be hot-added?()
第10题:
A customer uses an IBM xSeries x366. They experienced downtime when the NIC failed earlier this year. Their Windows 2003 server needs to be accessible all the time, at the highest speed possible. Two adapters are currently installed in the x366. Which of the following is the procedure to obtain the best performance and ensure network functionality in case of NIC failure?()