NPIV presents Virtual HBA addresses and vendor specific information for disk and tape devices.vSCSI presents generic disk and tape device interfaces.
NPIV presents generic disk and tape device interfaces on virtual HBA addresses.vSCSI presents HBA addresses as SCSI with vendor specific information for disk and tape devices.
NPIV presents HBA addresses and vendor specific device information directly to the client partition.vSCSI presents vendor specific disk information and generic tape device interfaces through VIO server.
NPIV presents virtual HBA addresses with generic device information for SCSI based disk and tape devices.vSCSI presents vendor specific information for disk and tape device devices attached via SCSI hardware interfaces.
第1题:
You are the network administrator for Ezonexam.
Your Windows 2000 Server computer named Ezonexam1 contains two 36-GB hard disks. Disk 0 and Disk 1. Each disk is configured as a basic disc and has a single 36-GB NTFS partition. Both partitions are backed up to a tape each night. The partition on Disk 1 stores user data. Most users at Ezonexam encrypt their files. Disk 1 fails. You replace it with a new hard disk and create a single NTFS partition.
You need to recover the data as quickly as possible while maintaining the security of the files on Disk 1.
What should you do?
A.Restore the contents of Disk 1 from the most recent tape backup to a second file server. Instruct users to copy their files from the second file server to the new partition.
B.Restore the contents of Disk 1 from the most recent tape backup to a second file server. Log on to Ezonexam1 console as a recovery agent. Copy the files from the second file server to the new partition.
C.Restore the contents of Disk 1 from the most recent tape backup to the new partition on Ezonexam1. Instruct the users to verify the integrity of their files.
D.Restore the contents of Disk 1 from the most recent tape backup to the new partition on Ezonexam1. Run the cipher command to decrypt the files.
第2题:
A large corporation is concerned about the amount of time it takes to back up their main file server. They are also concerned that their IT technician frequently forgets to change the backup tapes, thereby leaving the company open to data loss. Which backup system would solve both problems?()
第3题:
Since RAM is only active when the computer is on, your computer uses disk to store information even when the computer is off. Which of the following is true?(74).
A.When your computer is on, only RAM is used to store information.
B.When your computer is on, only disk drives are used to store information.
C.When your computer is off, only RAM is used to store information.
D.When your computer is off, only disk drives are used to store information.
第4题:
An AIX LPAR has been reconfigured to use direct-attached disks. What is the best way to fully remove and delete the Virtual IO volumes?()
第5题:
Which of the following BEST describes the difference between differential and incremental backups?()
第6题:
Which of the following is true about RADIUSV end or Specific Attribute? ()
第7题:
A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently, the customer is considering an N_Port ID Virtualization (NPIV) capable switch. Which of the following should be mentioned to the customer regarding the NPIV switch?()
第8题:
A. When two-way disk mirroring is required for the allocation units
B. When three-way disk mirroring is required for the allocation units
C. When using hardware mirroring or RAID
D. When disk mirroring is required for the Automatic Storage Management (ASM) disks
第9题:
While using virtualization to share SAN adapters on a server, how does Node Port ID Virtualization (NPIV) differ from Virtual SCSI (vSCSI) related to the use of multipathing software?()
第10题:
After rebooting one Virtual IO (VIO) server in a redundant environment, the following command output from the client partition shows that the path to the shared disk from the rebooted VIO server remains in a failed state. Vio_client1# lspath Failed hdisk0 vscsi0 Enabled hdisk0 vscsi1 What must the administrator do to ensure that the path is automatically restored when a VIO server is brought back into service? ()