This section is where you define all chassis clustering configuration.
This configuration is required for members of a chassis cluster to talk to each other.
You can apply this configuration in the chassis cluster to make configuration easier.
This section is where unique node configuration is applied.
第1题:
A. Manually assign rid.
B. configure local-address.
C. enable the fxp0 interface.
D. Assign nonmartian address to lo0.
第2题:
A.
B.
C.
D.
第3题:
[editgroups]user@hostshownode0{system{host-nameNODE0;}interfaces{fxp0{unit0{familyinet{address1.1.1.1/24;}}}}}node1{system{host-nameNODE1;}interfaces{fxp0{unit0{familyinet{address1.1.1.2/24;}}}}}Intheexhibit,whatisthefunctionoftheconfigurationstatements?()
A.Thissectioniswhereyoudefineallchassisclusteringconfiguration.
B.Thisconfigurationisrequiredformembersofachassisclustertotalktoeachother.
C.Youcanapplythisconfigurationinthechassisclustertomakeconfigurationeasier.
D.Thissectioniswhereuniquenodeconfigurationisapplied.
第4题:
Which protocol family is required prior to assigning an IP address to an interface?()
第5题:
A.set interfaces fe-0/0/0 unit 0 ethernet-options mtu 1200
B.set interfaces fe-0/0/0 mtu 1200
C.set interfaces fe-0/0/0 unit 0 mtu 1200
D.set interfaces fe-0/0/0.0 mtu 1200
第6题:
A. You must set the vlan-tagging parameter under the [edit interfaces ge-0/0/1] hierarchy.
B. You must use the rename command to change unit 100 to unit 0.
C. You must set the encapsulation flexible-ethernet-services parameter under the [edit interfaces ge-0/0/1] hierarchy.
D. You must set the encapsulation vlan-ccc parameter under the [edit interfaces ge-0/0/1 unit 100] hierarchy.
第7题:
A.set interfaces fe-0/0/0 address 10.1.1.1/24
B.set interfaces fe-0/0/0.0 family inet address 10.1.1.1/24
C.set interfaces fe-0/0/0.0 address 10.1.1.1/24
D.set interfaces fe-0/0/0 unit 0 family inet address 10.1.1.1/24
第8题:
A. This interface is a system-created interface.
B. This interface belongs to NODE0 of the cluster.
C. This interface belongs to NODE1 of the cluster.
D. This interface will not exist because J6350 routers have only six slots.
第9题:
A.family ip
B.family ip6
C.family inet
D.family inet4
第10题:
Which interface is used for RTO synchronization and forwarding traffic between the devices in a cluster?()