违法和不良信息举报 联系客服
免费注册 登录

A technician manages a server that contains sensitive data. The server currently has two hard drives， one hosting the operating system and other generic files and the second hosting sensitive data. The technician needs to implement a technology that would

题目

A technician manages a server that contains sensitive data. The server currently has two hard drives， one hosting the operating system and other generic files and the second hosting sensitive data. The technician needs to implement a technology that would guard against data loss for only the sensitive data， while adding only one additional hard drive. Which of the following should the technician implement to avoid reformatting any drives？（）

  • A、RAID 0
  • B、RAID 1
  • C、RAID 3
  • D、RAID 5
参考答案和解析
正确答案:B
如果没有搜索结果或未解决您的问题，请直接 联系老师 获取答案。
相似问题和答案

第1题：

You are the administrator of a Windows NT 4.0 Terminal Server Edition computer. The server has one hard disk, which is divided into two partitions The first partition contains the Windows NT 4.0 system files and is formatted as FAT. The second partition contains application data and user data. This second partition is formatted as NTFS. The server currently has Service Pack 3 installed.

You need to upgrade the server to Windows 2000 Server. You want to ensure that no application data or user data is lost during the upgrade. You also want to perform. the minimum number of steps necessary to complete the upgrade.

What should you do? (Choose all that apply)

A．Convert the system partition to NTFS.

B．Install service pack4 or later on the server.

C．Use a Windows 2000 Server CD to start the server. In setup, select the option to upgrade.

D．Replace the Terminal Server installation with a standard Windows NT server 4.0 installation.


正确答案：B
解析：Explanation: To ensure that no application data or user data is lost during the upgrade the following two steps will be taken:
1. Install service pack4 (B).
2. Start the installation process from within the Windows environment and select the option to upgrade (almost C, but not quite).

Incorrect answers:
A: NTFS is not required

C: You can't upgrade to Windows 2000 by booting from the CD. The CD must be run from within the NT environment.

D: It is not necessary to install a standard NT Server 4.0 server.

第2题：

After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server from the original drive？（）

  • A、Replace the second drive with a hot swappable one.
  • B、Swap the drive boot order in the BIOS
  • C、Make the second disk active under the disk management tool.
  • D、Rebuild the array using the hardware RAID tool at boot.

正确答案:B

第3题：

Your network contains a database server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2).Server1 has the following hardware configurations:·A single processor that supports hyper-threading·Dual processor motherboard·Two hard disks·2 GB of RAMThe first disk contains all the files for the operating system and applications. The second disk is empty.Hyper-threading is disabled in the BIOS.Users report a slow response when they query the database on Server1.You monitor Server1 for one day and receive the performance statistics shown in the following table.You need to improve database performance.What should you do? （）

A. Upgrade the RAM to 4 gb.

B. Install a second processor.

C. Enable hyper-threading in the bios.

D. Move the database to the second disk.


参考答案：D

第4题：

A server technician has been attempting to install an operating system on the company test server for several days. The technician has experienced error messages at several points of theinstallation and the system has frozen during various parts of the boot process. The technician has replaced the power supply， graphics card and installation disk with known good components.Which of the following could be causing these issues？（）

  • A、Storage driver not loaded
  • B、Fragmented hard drive
  • C、Damaged or faulty NIC chipset
  • D、Damaged or faulty system board
  • E、Memory incompatible with the processor
  • F、Missing voltage regulator

正确答案:D,E

第5题：

A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive.   After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website.   Which action should the technician take next？（）

  • A、 backup the BIOS configuration to use later
  • B、 install the BIOS update from a command prompt
  • C、 create a bootable floppy and copy the BIOS update tools to the floppy
  • D、 read the manufacturer’s guidelines and recommendations on installing the update

正确答案:D

第6题：

You are the network administrator for Ezonexam.

The network includes a Windows 2000 Server computer that contains a single 36-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 4 GB in size and contains the operating system files. Partition D is 32 GB in size and contains user data that is updated frequently.

Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 11:00 P.M.You have a current Emergency Repair Disk (ERD) for the computer, and Recovery Console is installed on the computer.

One day at2:00 P.M., the server fails. You attempt to restart the computer, but you receive the following error message: "Boot disk or operating system not found." You use Recovery Console to discover that the files on partition C are corrupted.

You want to recover the server from the failure as quickly as possible. You also want to recover as much user data as possible.

What should you do?

A．Start the computer by using a Windows 2000 Server compact disc. Select the Repair option in Setup.

B．Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.

C．Use a Windows 2000 Server boot floppy disk to start the computer. Replace the corrupted files on partition C by copying them from the Emergency Repair Disk.

D．Boot to the Recovery Console. Copy any files that have changed since 11:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.


正确答案：A
解析：Explanation:Therearefourwaystoperform.anattendedinstallation:1.BoottoaCD-ROM,therebyinvokingthesetuproutine.2.BoottoacurrentoperatingsystemwithCD-ROMsupportandmanuallyinvokethesetuproutine.3.BoottoasetoffoursetupdisksandthenprovidetheCD-ROMwhenprompted.4.Boottoanetwork-awareoperatingsystemandinvokesetupoverthenetwork.IfyouhaveacomputerwhoseBIOSsupportsbootingfromaCD-ROM,youcansetupWindows2000Serverwithoutinstallinganoperatingsystemonyourharddriveandwithoutrequiringnetworksupport.Todoso,configureyourcomputertoboottotheCD-ROMintheBIOS.IntheabovescenariotheserverfailedandforyoutorecovertheserverasquicklyaspossibleandrecoveringasmuchdataaspossibleyouneedtousetheWindows2000ServerCDandselecttheRepairoptioninSetup.Incorrectanswers:B:Thisoptionwillnotbethebesttofollowiftheserveristoberecoveredwithintheshortestpossibletime.Youwillalsolosesomedatasincere-creatingthesharedfoldersonthefirstharddiskwouldalreadyhavedatamissingsincePartitionCiscorrupted.C:EmergencyRepairDiskenablesyoutorecoverfromRegistrysettingsthatrenderyoursysteminoperable.ThismightbemisconfigurationthatcouldnotbecaughtwiththeLastKnownGoodConfiguration,oritmightbedeleteduseraccountsorotherRegistrychanges.Thisisnotaregistryproblem.TheEmergencyRepairDiskcanbeusedtofacilitatesomesystemrepairsonyourWindows2000server.Essentially,thediskcanbeusedtorepairstartupproblems,likewhenessentialstartupfilesarenotpresentandyourServerrefusestoboot.However,thisproblemneedstobeaddressesasquicklyaspossibleandmakinguseoftheRepairoptioninSetupfromtheWindows2000ServerCDwouldbethequickermethod.D:TheRecoveryconsoleisapowerfultext-basedbootalternativeforWindows2000Server.Ifyoursystembecomessocorruptthatitwillnotbootandnootherrepairprocesswillhelp,youcanboottotheRecoveryconsoleandcopyfilestoorfromyourserver.Inaddition,youcanstopandstartservices,ifaservicethatyouhaveinstalledcausesproblemswithbooting.Thisoptiondoesnotrepresentthequickestwaytoaddresstheproblemathand.

第7题：

A technician has just finished installing a new server into a server rack. Which of the following should the technician do NEXT to complete the installation documentation？（）

  • A、Update drivers， update operating system （e.g. Windows Update）， create server baseline， createa new network diagram， update change management procedures
  • B、Create server baseline， label server， store vendor-specific documentation， update networkdiagrams， update asset tracking information
  • C、Create server baseline， assign server roles， install tape drive， delete network diagram， labelserver， update operating system （e.g. Windows Update）
  • D、Install applications on server， install external drives， toss vendor-specific documentation，update network diagrams

正确答案:B

第8题：

Your Windows 2000 Server computer named EzonexamSrv contains a single 18-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 2 GB in size and contains the operating system files. Partition D is 16 GB in size and contains user data that is updated frequently.

Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 10:00 P.M.You have a current Emergency Repair Disk (ERD) for EzonexamSrv, and the Recovery Console is installed on the computer.

One day at4:00 P.M., the server fails. You attempt to restart EzonexamSrv, but you receive the following error message:

"Boot disk or operating system not found".

You use Recovery Console to discover that the files on partition C are corrupted.

You need to recover EzonexamSrv from the failure as quickly as possible. You also must recover as much user data as possible.

What should you do?

A．Use the ERD to start the computer. Replace the corrupted files on partition C by copying them from a Windows 2000 Server CD-ROM.

B．Boot the Recovery Console. Copy any files that have changed since 10:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.

C．Start the computer by using a Windows 2000 Server CD-ROM. Select the Repair option in Setup.

D．Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.


正确答案：C
解析：Explanation:TheuserdataondriveDisnotharmed.WejustneedtogettheoperatingsystemondriveCoperationalagain.WeshouldusetheRecoveryConsoleandrepairthesystemfiles.WestarttheRecoveryconsolebybootingfromtheWindows2000ServerinstallationCD-ROM.Note:Iftherepairprocessdoesnotwork,wecouldreinstalltheoperatingsystemondriveC.DriveDdatawouldstillbecurrent.IncorrectAnswersA:AWindows2000computercannotbestartedbytheEmergencyRepairDiskette.B:Thereisnoneedtocopyanyfiles.AlluserfilesareonDriveD,andtheyarenotdirectlyaffectedbythecorruptedsystemfiles.D:Thesecondpartitionisnotaffectedbytheerror.Itisnotnecessarytoinstallanotherharddisk.

第9题：

A user requires more storage space on their computer. After a technician installs a second IDE drive in the computer, the system will not recognize that there are any hard drives installed. Which of the following is the MOST likely cause of the problem?（）

  • A、The second hard drive has not been formatted for NTFS.
  • B、The jumpers on both drives are set to the cable select position.
  • C、The jumper on the first drive is set to master and the second is set to slave.
  • D、The jumpers on both drives are set to the master position.

正确答案:D

第10题：

Two new servers are purchased and need to be installed to allow sharing of a single external hard drive enclosure.  One server is configured as a local file server， and the other as a database server for a different network.  The onsite technician notices that when both servers are running at the same time， they each receive SCSI errors. When they are running individually， no errors are reported.   Which of the following is the BEST source of information to use for troubleshooting this problem？（）

  • A、 the server vendor’s FAQ website
  • B、 the SCSI controller vendor’s user manual
  • C、 the drive enclosure vendor’s user manual
  • D、 the network operating system vendor’s website

正确答案:C

更多相关问题
相关内容