Company.com is ordering a new p5-570 and planning for the option of using Capacity on  Demand to activate additional resources in the future. Which of the following is a prerequisite to support the addition of CPUs or memory without an outage？（）A、Use Micr

第1题：

A customer would like to have the ability to permanently activate processor and memory resources as their workload increases. Which of the following supports the customer requirement?（）

• A、Reserve Capacity on Demand
• B、Utility Capacity on Demand
• C、Capacity Upgrade on Demand
• D、Uncapped Capacity on Demand

第2题：

A new computer is displaying the wrong amount of memory. Which of the following may be the cause？（）

• A、The module is installed backwards.
• B、A USB device is using some memory.
• C、An onboard video card is using some memory.
• D、The CPU is using some memory.

第3题：

Due to slow response times， a customer purchased additional memory. After the memory was installed，response time was not improved.  They complained to the pSeries technical specialist. Which of the following questions should be asked of this customer？（）

• A、Who recommended the memory purchase？
• B、Have more users been added since the memory purchase？
• C、Why were additional CPUs not ordered at the same time as the memory？
• D、Did a performance analysis of peak periods show a memory bottleneck？

第4题：

A customer is planning to migrate a financial application to a 12-way p5-570 system with 96GB of memory.  The application data is stored on an ESS Model 800 attached to a p670 server with AIX 5.2.  They will have a short outage window to perform the data migration.  What is the quickest way to move all the data stored on the attached ESS from the p670 to the new p5-570？（）

• A、Use rsync to synchronize the data across servers.
• B、Use exportvg and importvg to move the data to the target system.
• C、Use NFS to copy the data from the source system to the target system.
• D、Backup the data from the source system and restore to the target system.

第5题：

A server needs to have memory added to support a new application. It currently is using PC4200 in a single channel configuration. Which of the following would be the correct memory upgrade？（）

• A、Install larger capacity PC2100 dual channel memory modules.
• B、Add a PCI expansion card with PC2100 single channel memory modules.
• C、Install smaller capacity PC4200 single channel memory modules.
• D、Install larger capacity PC4200 single channel memory modules.

第6题：

A customer has two Power 770 systems with 4 enclosures each.  Thirty two cores and 1TB of memory are activated on each system.  Each system has 3 database partitions and each partition has 10 cores and 300GB of memory.   Which solution will provide automated recovery of unplanned outages at least cost？（）

• A、Purchase PowerVM Enterprise Edition.Use System Director to automate Live Partition Mobility to recover from partition failure
• B、Create additional shared processor partitions as standby nodes.Use PowerHA SystemMirror to activate and use CoD resources when a failover occurs
• C、Purchase an additional 32-core Power 750 with PowerHA SystemMirror Standard Edition.Use the new system as standby node with the XD component of PowerHA
• D、Purchase an additional Power 770 system.Locate production and standby database partitions on each system.Use DB2 pureScale to provide automated partition monitoring and failover

第7题：

An administrator is adding additional memory into a server that registers 1GB of memory in the OS and notices that the system has 2GB of memory physically installed； however， the server only shows 1GB of memory during POST.  Which of the following is the MOST likely reason for this？（）

• A、 The OS does not support more than 1GB of memory.
• B、 The system memory has different manufacture dates.
• C、 Two of the memory sticks are defective.
• D、 The server is using memory interleaving.

第8题：

When planning for a logically partitioned system，which of the following should be used as part of a review to ensure that each partition has the required resources？ （）

• A、Use the Workload Estimator capacity planning tool.
• B、Use prtconf output from legacy systems.
• C、Use the LPAR Validation Tool.
• D、Use Performance Management Services.

第9题：

Which of the following is a correct statement about Workload Partitions （WPARs）？（）

• A、WPARs use dedicated cores and shared memory.
• B、WPARs are restricted to using dedicated resources.
• C、WPARs share the resources of a single AIX instance.
• D、WPARs use shared cores， memory， and dedicated network adapters.

第10题：

Which of the following functions can be performed using the Integrated Virtualization Manager?（）

• A、Concurrent firmware updates
• B、Management of virtual storage
• C、Hot add/remove of I/O drawers
• D、Management of Capacity on Demand