What are two ways that a valid IBGP peering session can be configured?（）
第1题：
A. BGP requires redundant TCP sessions between iBGP peers.
B. Routes learned via eBGP are never propagated to other iBGP peers.
C. A full mesh allows for optimal routing within the Transit AS.
D. Routes learned via iBGP are never propagated to other eBGP peers.
E. Routes learned via iBGP are never propagated t o other iBGP peers.
第2题：
A. The network was originated via redistribution of an interior gateway protocol into BGP.
B. The network was defined by a static route.
C. The network was learned via IBGP.
D. The network was learned via EBGP.
E. The network was originated via a network or aggregate command.
第3题：
A. via the accept x.x/y command
B. via TCP reachable physical interface addresses
C. via remote loopbacks with the local-address command
D. via UDP with the neighbor x.x.x.x command at the group level
第4题：
What is the main reason for using the "ip ips deny-action ips-interface" IOS command？（）
第5题：
What are the two reasons for the appearance of 0.0.0.0 as the next hop for a network in the show ip bgp command output？（）
第6题：
A. The BGP split - horizon rule specifies that routes learned via EBGP are never propagated to other IBGP peers.
B. The BGP split horizon rule specifies that routes learned via IBGP are never propagated to other IBGP peers.
C. A full - mesh IBGP requires that neighbor relationships be established between a ll BGP enabled routers in the autonomous system.
D. IBGP neighbors must be in different autonomous systems.
E. An EGP or static routing is required between IBGP neighbors.
第7题：
A. using aggregate routes
B. defining routes via the network statement
C. disablin g synchronization
D. forcing the next - hop address
第8题：
A.RCP
B.Telnet
C.RSH
D.SSH
第9题：
What are the two reasons for the appearance of 0.0.0.0 as the next hop for a network when usingthe "show ip bgp" command？（）
第10题：
VIA（Versatile Interface Adapter）指（）。