In a chassis cluster with two SRX 5800 devices, the interface ge-13/0/0 belongs to which device?()
第1题:
A. user@host# set chassis cluster cluster-id 1 node 0 reboot
B. user@host> set chassis cluster id 1 node 0 reboot
C. user@host> set chassis cluster cluster-id 1 node 0 reboot
D. user@host# set chassis cluster id 1 node 0 reboot
第2题:
A. show chassis hardware
B. show chassis temperature-thresholds
C. show chassis pic fpc-slot <value> pic-slot <value>
D. show chassis environment
第3题:
A. This section is where you define all chassis clustering configuration.
B. This configuration is required for members of a chassis cluster to talk to each other.
C. You can apply this configuration in the chassis cluster to make configuration easier.
D. This section is where unique node configuration is applied.
第4题:
In a chassis cluster with two SRX 5800 devices, the interface ge-13/0/0 belongs to which device?()
第5题:
7750SR通过什么命令来查看设备的当前系统时间()
第6题:
A. This interface is a system-created interface.
B. This interface belongs to node 0 of the cluster.
C. This interface belongs to node 1 of the cluster.
D. This interface will not exist because SRX 5800 devices have only 12 slots.
第7题:
在7750SR上,查看设备运行温度情况的命令是()
第8题:
You have configured your chassis cluster to include redundancy group 1. Node 0 is configured to be the primary node for this redundancy group. You need to verify that the redundancy group failover is successful.Which command do you use to manually test the failover?()
A. request chassis cluster manual failover group 1 node 1
B. request cluster failover redundancy-group 1 node 1
C. request chassis cluster manual failover redundancy-group 1 node 1
D. request chassis cluster failover redundancy-group 1 node 1
第9题:
If both nodes in a chassis cluster initialize at different times, which configuration example will allow you to ensure that the node with the higher priority will become primary for your RGs other than RG0?()
第10题:
What is a redundancy group in JUNOS Software?()