Three physical interfaces are redundant.
You must define an additional redundancy group.
node 0 will immediately become primary for redundancy group 1.
You must issue an operational command and reboot the system for the above configuration to take effect.
第1题:
If both nodes in a chassis cluster initialize at different times, which configuration example will allow you to ensure that the node with the higher priority will become primary for your RGs other than RG0?()
A. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150;preempt; }
B. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; monitoring; }
C. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; control-link-recovery; }
D. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; strict-priority; }
第2题:
A. set apply-groups node$
B. set apply-groups (node)
C. set apply-groups $(node)
D. set apply-groups (node)all
第3题:
A. This section is where you define all chassis clustering configuration.
B. This configuration is required for members of a chassis cluster to talk to each other.
C. You can apply this configuration in the chassis cluster to make configuration easier.
D. This section is where unique node configuration is applied.
第4题:
Company.com has a three-node cluster (Node ’A’, Node ’B’, and Node ’C’) with three resource Groups (rg1, rg2, and rg3). Node ’A’ has twice as many CPUs and twice as much memory as the two test add development Nodes ’B’ and ’C’. During normal production processing, all resource groups are active on Node ’A’. What is most efficient way to configure the cluster to manage the workload?()
第5题:
A customer has a resource group rg1 configured on a two node cluster with the following policies:The customer has observed the following scenarios as nodes join the cluster during cluster start up. Scenario 1 Node1 joins cluster as first node - rg1 is acquired by Node1 Node2 joins cluster as second node - rg1 ismoved from Node1 to Node2 Scenario 2 Node2 joins cluster as first node - rg1 is acquired by Node2 Node1 joins cluster as second node - rg1 remainson Node2 Which of the following is the reason for this behavior?()
第6题:
A. This interface is a system-created interface.
B. This interface belongs to node 0 of the cluster.
C. This interface belongs to node 1 of the cluster.
D. This interface will not exist because SRX 5800 devices have only 12 slots.
第7题:
A. Three physical interfaces are redundant.
B. You must define an additional Redundancy Group.
C. node 0 will immediately become primary in the cluster.
D. You must issue an operational command and reboot the system for the above configuration to take effect.
第8题:
A. user@host# set chassis cluster cluster-id 1 node 0 reboot
B. user@host> set chassis cluster id 1 node 0 reboot
C. user@host> set chassis cluster cluster-id 1 node 0 reboot
D. user@host# set chassis cluster id 1 node 0 reboot
第9题:
When applying the configuration in the exhibit and initializing a chassis cluster, which statement is correct?() [edit chassis] user@host# show cluster { reth-count 3; redundancy-group 1 { node 0 priority 1; node 1 priority 100; } }
第10题:
[edit groups] user@host# show node0 { system { host-name NODE0; } interfaces { fxp0 { unit 0 { family inet { address 1.1.1.1/24; } } } } } node1 { system { host-name NODE1; } interfaces { fxp0 { unit 0 { family inet { address 1.1.1.2/24; } } } } } In the exhibit, what is the function of the configuration statements?()