Your company has a server named Server1 that runs Windows Se

第1题：

第2题：

Your company has a server named Server1 that runs Windows Server 2008 R2. Server1 runs the DHCP Server server role and the DNS Server server role. You also have a server named ServerCore that runs a Server Core installation of Windows Server 2008 R2. All computers are configured to use only Server1 for DNS resolution. The IP address of Server1 is 192.168.0.1. The network interface on all the computers is named LAN. Server1 is temporarily offline. A new DNS server named Server2 has been configured to use the IP address 192.168.0.254.You need to configure ServerCore to use Server2 as the preferred DNS server and Server1 as the alternate DNS server. What should you do？（）

• A、Run the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.254 index=1 command.
• B、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 192.168.0.1 both command.
• C、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.1 both command.
• D、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.1 index=1 command.

第3题：

第4题：

Your company has a server named Server1 that runs Windows Server 2008. The Windows Backup and Restore utility is installed on Server1. Server1 fails. You install a new server named Server2 that runs Windows Server 2008. You need to restore the companys Windows SharePoint Services （WSS） site to Server2 What should you do？（）

• A、 Use Wbadmin to restore the system state from backup
• B、 Run Wbadmin with the Get Versions option. Install WSS
• C、 Run Wbadmin with the Start Recovery option. Install WSS
• D、 Use Wbadmin to restore the application and the sites from backup

第5题：

Your company has a server named Server1 that runs a Server Core installation of Windows Server 2008， and the DNS Server server role. Server1 has one network interface named Local Area Connection. The static IP address of the network interface is configured as 10.0.0.1. You need to create a DNS zone named local.contoso.com on Server1.  Which command should you use？（）

• A、ipconfig /registerdns：local.contoso.com
• B、dnscmd Server1 /ZoneAdd local.contoso.com /DSPrimary
• C、dnscmd Server1 /ZoneAdd local.contoso.com /Primary /file local.contoso.com.dns
• D、netsh interface ip v4 set dnsserver name= local.contoso.com static 10.0.0.1 primary

第6题：

Your company has a domain controller named Server1 that runs Windows Server 2008 and the DNS server role. A server named Server2 runs a custom application. You need to configure DNS to include the following parameters for the custom application： Service Priority Weight Protocol Port Number Host offering this service Which record should you create？（）

• A、 Host Info （HINFO）
• B、 Service Locator （SRV）
• C、 Canonical Name （CNAME）
• D、 Well-Known Service （WKS）

第7题：

Your company has a server named Server1 that runs Windows Server 2008 R2. Server1 runs the DHCP Server server role and the DNS Server server role. You also have a server named ServerCore that runs a Server Core installation of Windows Server 2008 R2.All computers are configured to use only Server1 for DNS resolution. The IP address of Server1 is 192.168.0.1. The network interface on all the computers is named LAN.Server1 is temporarily offline. A new DNS server named Server2 has been configured to use the IP address 192.168.0.254.You need to configure ServerCore to use Server2 as the preferred DNS server and Server1 as the alternate DNS server.What should you do？（）

• A、Run the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.254 index=1 command.
• B、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 192.168.0.1 both command.
• C、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.1 both command.
• D、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.1 index=1 command.

第8题：

第9题：

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 runs Windows Server 2012 R2. Server2 runs Windows Server 2008 R2 Service Pack 1 （SP1） and has the DHCP Server server role installed. You need to manage DHCP on Server2 by using the DHCP console on Server1. What should you do first？（）

• A、From Windows Firewall with Advanced Security on Server2， create an inbound rule
• B、From Internet Explorer on Server2， download and install Windows Management Framework 3.0.
• C、From Server Manager on Server1， install a feature
• D、From Windows PowerShell on Server2， run Enable PSRemoting

第10题：

Your company has a server named Server1 that runs Windows Server 2008. Server1 is a Windows ServerUpdate Services (WSUS) server. You have a computer named Computer1 that runs Windows 7. Computer1 is configured to obtain updates from Server1. You open the WSUS snap-in on Server1 and discover that Computer1 does not appear. You need to ensure that Computer1 appears in the WSUS snap-in.  What should you do?（）

• A、On Server1， open Windows Update then select Check for updates.
• B、On Server1， run Wsusutil.exe and specify the /import parameter.
• C、On Computer1， open Windows Update and then select Change settings.
• D、On Computer1， run Wuauclt.exe and specify the /detectnow parameter.