Straight-through cable is used to connect both switches
Loopback plug is connected
Crossover cable is used to connect both switches
Cable is a rollover cable
第1题:
Youupdatedtheresourceplandirectivefortheresourceconsumergroup,DSS_USERS.TheresourceplandirectiveisassignedtotheDSS_PLANbyusingthefollowingstatement:
SQL>EXECDBMS_RESOURCE_MANAGER.UPDATE_PLAN_DIRECTIVE(PLAN=>’DSS_PLAN’,
GROUP_OR_SUBPLAN=>’DSS_USERS’,
NEW_CPU_P1=>80,
NEW_SWITCH_GROUP=>’CANCEL_SQL’,
NEW_SWITCH_ESTIMATE=>TRUE,
NEW_SWITCH_TIME=>600);
Auserconnectstothedatabaseandstartsanoperation.WhatistheoutcomeifOracleestimatesthattheexecutiontimeforthisoperationwillexceed600seconds?()
第2题:
An administrator is having a hard time adding a new switch to the network. After verifying that allthe ports are configured correctly on each switch, which of the following should the administratorverily NEXT?()
A. Straight-through cable is used to connect both switches
B. Loopback plug is connected
C. Crossover cable is used to connect both switches
D. Cable is a rollover cable
第3题:
The statesman had a hard time__________ his supporters to see the point.
A. getting
B. got
C. having got
D. to get
第4题:
A switch is configured with all ports assigned to vlan 2 with full duplex FastEthernet to segment existing departmental traffic. What is the effect of adding switch ports to a new VLAN on the switch?()
第5题:
An administrator is unsuccessful in adding VLAN 50 to aswitch. While troubleshooting the problem, the administrator views the output of the show vtp status command, which is displayed in the graphic. What commands must be issued on this switch to add VLAN 50 to the database?()
A. Switch(config-if)# switchport access vlan 50
B. Switch(vlan)# vtp server
C. Switch(config)# config-revision 20
D. Switch(config)# vlan 50 name Tech
E. Switch(vlan)# vlan 50
F. Switch(vlan)# switchport trunk vlan 50
第6题:
The network administrator has just finished installing a new 10/100/1000 switch, but receives reports from the server administrator that servers connected to the new switch seem to be experiencing slow LAN connections. The network administrator checks the port connecting the new switch to the core switch and sees the following information:Which of the following is the MOST likely cause of the slow connections?()
A. The servers have not had VLAN tagging enabled on their NICs.
B. Speed and duplex have not been set.
C. VLAN tagging was not set on the trunk.
D. The servers have been connected with CAT5 cable.
第7题:
After connecting a PC to an available port on a switch, you find that the PC can not access any of the resources on the LAN. No other PC's connected to the switch appear to be having any issues. What is the most likely cause for this problem?
A.The router lacks a routing table entry for the new host
B.The host switch port is assigned to the incorrect VLAN
C.The host MAC address is incorrectly configured
D.A STP instance for the new host has not been initialized
E.The switch does not have the MAC address hard coded in the CAM table.
第8题:
A Ezonexam switch is configured with all ports assigned to VLAN 2. In addition, all ports are configured as full-duplex FastEthernet. What is the effect of adding switch ports to a new VLAN on this switch?
A.The additions will create more collisions domains.
B.IP address utilization will be more efficient.
C.More bandwidth will be required than was needed previously.
D.An additional broadcast domain will be created.
E.The possibility that switching loops will occur will increase dramatically.
第9题:
第10题:
A network administrator needs to configure port security on a switch.which two statements are true?()