bunker at a normal rate
check for kinks in hose
close valves slowly
shut valves before topping off
第1题:
If the head pressure of a reciprocating refrigeration compressor is excessive
A.the relief valve should open before the high pressure cutout
B.the relief valve should open and allow the excess refrigerant to flow to the receiver
C.the high pressure cutout switch should operate before the relief valve opens
D.you should close the discharging valve
第2题:
When you're _t_________ ,you should have some water.
第3题:
This place is so crowded What shall we do about it?
A.I suggest we should evacuate the theatre as quickly as possible to avoid a trample
B.I advise you not to enter the theatre in order to avoid a trample
C.I’d like to give a tip that you may leave here quickly to avoid a trample
D.I made a suggestion that we cancel the performance immediately to avoid a trample
第4题:
When bunkering is complete,the hoses should be ______.
A.Cleaned internally with a degreaser
B.Washed out with hot soapy water
C.Drained,blanked off,and stored securely
D.Stowed vertically and allowed to drain
第5题:
When the steering gear is in operation, you should ______.
A.check hydraulic oil levels every hour
B.check the rams for overheating
C.check for excessive oil leakage from rams
D.drain water from tele-motor cylinders each watch
第6题:
A. Surge protector
B. UPS
C. RJ-45 connector
D. Toner
第7题:
When you find you make a mistake in the chat room, what should you do?
_____________________________________________________________________________
第8题:
What attention should be paid when bunkering oil in the USA?
第9题:
A precaution you should take before bunkering is to ______
A.plug the vents
B.plug the sounding pipes
C.plug the scuppers
D.close the lids on the vents
第10题:
Which statement about inert gas pressures in a cargo tank is TRUE ________.
A.The pressures of the inert gas in the tank may create excessive pressure at the pump while discharging
B.Gas pressures should be maintained at the highest permissible level throughout the discharging process
C.High gas pressures may cause pyrophoric oxidation in the tank
D.High gas pressures may cause loss of suction when stripping