sliding block
pintle
reaction ring
tilting box or swash plate
第1题:
The usual number of single-acting pistons used in a variable stroke axial-piston pump is
A.3 or 5
B.5 or 7
C.7 or 9
D.9 or 11
第2题:
If one hydraulic pump of an electro-hydraulic steering unit fails, the vessel’s steering can be initially and best maintained by using the ______.
A.trick wheel
B.accumulator
C.standby pump
D.Telemotor
第3题:
Overheating of the hydraulic fluid in an electro-hydraulic anchor windlass can result from a/an( ).
A.overload on the pump motor
B.low fluid level in the reservoir
C.low fluid viscosity around the shaft seal
D.high oil level in the sump
第4题:
neutral
end
opening
closure
第5题:
excessive drive motor speed
excessive pump discharge pressure
too low of a tilting box angle
insufficient drive motor speed
第6题:
Leakage of hydraulic fluid from around the shaft of a hydraulic motor may be caused by ______.
A.permanent loss of pump suction
B.worn shaft seals
C.high level in the oil sump
D.low motor RPM
第7题:
ram relief valves bypass oil to stop rudder movement
six-way valve shifts to the neutral flow position
steering pump electric motor is de - energized by the transfer switch
follow-up gear takes the hydraulic pump off stroke
第8题:
The delivery rate of an axial piston hydraulic pump is controlled by varying the position of the
A.tilting box
B.slide block
C.pintle
D.reaction ring
第9题:
reduce radial thrust to the impeller
double the liquid velocity through the pump when compared to a single volute
reduce hydraulic end thrust
provide the effect of multi-staging
第10题:
in the pert position
in the starboard position
in the neutral position
to be dismantled