noise coming from that air starting valve
continuous operation of the starting air compressor
zero air pressure in the air starting system
overheated starting air pipe to the cylinder head
第1题:
Which of the following factors tends to increase scale formation on the saltwater side of a heat exchanger used in a diesel engine cooling water system?
A.Baffle plates that have been bent during prior removal
B.Leaks m the cooler tube nest
C.Operating the engine while maintaining a high sea water outlet temperature
D.A punctured sea water strainer supplying cooling water to the heat exchanger
第2题:
Impeller
Compressor
After-cooler
Exhaust differ
第3题:
Before engaging the turning gear and turning the diesel engine, which of the following operation should be done except______.
A.open the indicator cocks
B.supply some CYL.Oil to cylinder liner wall with lubricator (only for two stoke diesel engine)
C.put the fuel handle in the "stop" position
D.pump up the air bottle
第4题:
Quantity of fuel injected tends to be decreased
Quantity of fuel injected will always be increased
Start of injection tends to be advanced
Duration of injection will always greater
第5题:
Leaking seal ring
Insufficient heat transfer from the exhaust valves
Block cooling water passages to the head
Excessive scavenging air provided to the engine
第6题:
In an operating diesel engine, which of the following conditions is an indication of a leaking air starting valve?
A.Noise coming from that air starting valve
B.Continuous operation of the starting air compressor
C.Zero air pressure in the air starting system
D.Overheated starting air pipe to the cylinder head
第7题:
water in the fuel
insufficient fuel for combustion
clogged air intake passages
burning lubricating oil
第8题:
Which of the following conditions could contribute to the cracking of a diesel engine cylinder head?
A.Leaking seal ring
B.Insufficient heat transfer from the exhaust valves
C.Blocked cooling water passages to the head
D.Excessive scavenging air provided to the engine
第9题:
Decreased connecting rod bearing clearance
Increased connecting rod bearing clearance
Decreased compression ratio
Increased compression ratio
第10题:
Exhaust temperature
Lube oil level
Lube oil pressure
Water level in the expansion tank