Only one pump should be used at any time
The ship speed should be reduced to 70% of the normal
Watch keeping of the steering gear should be increased
Limitations of the steering gear should be logged but the bridge need not be informed
第1题:
When steering by hand,which of the following may be a functional input to the steering gear as a result of turning the wheel ________.
A.Non-follow-up
B.Rudder adjustment
C.Weather adjustment
D.All the above may be activated
第2题:
a test from the alternative power supply,if installed
timing the movement of the rudder from hard over to hard over
verification that the rudder angle indicator shows the actual position of the rudder(s)
visual inspection of the steering linkage
第3题:
The_______in the steering gear move the rudder to the required angle
A.control equipment
B.power unit
C.transmission mechanisms
D.fittings and pipeline
第4题:
The three moving vanes and the three fixed vanes form three pressure chambers
The three moving vanes and the three fixed vanes form six pressure chambers
The three moving vanes and the three fixed vanes form nine pressure chambers
The three moving vanes and the three fixed vanes form twelve pressure chambers
第5题:
changing over to hand pump operation
engaging the trick wheel
the system has been filled with new oil
the rudder angle indicator does not match the helm position
第6题:
Which TWO of the following are required to use the hot-swap memory feature of the x445 while being operating system independent?()
第7题:
The six-way valve opens
The steering service pump motor is stopped
The follow-up gear takes the pump off stroke
The cylinder relief valves bypass oil to the suction side the pump
第8题:
In ______ the control action is independent on the output.
A.a closed loop control system
B.an open loop control system
C.a boiler control system
D.a steering gear control system
第9题:
the emergency lighting system for muster and abandon ship
air/oil emergency shut-down
M-Eemergency operation
main/auxiliary steering gear changing
第10题:
control equipment
power unit
transmission mechanisms
fittings and pipeline