违法和不良信息举报 联系客服
免费注册 登录

You install an updated device driver for a zip drive on a Wi

题目
多选题
You install an updated device driver for a zip drive on a Windows 2000 Professional computer. You restart the computer. During the startup process, the computer stops responding. You then restart the computer in the Safe Mode. During the startup process, the computer stops responding again. You suspect the new device driver is causing the problem. You want to resolve the problem so that the computer starts successfully.  What should you do?（）
A

Use the listsvc command to disable the Zip device driver.

B

Use the disable command to disable the Zip device driver.

C

Select Recovery Console from the Repair menu.

D

Select the debug mode from the Windows 2000 Advanced Options menu.

E

Insert the Emergency Repair Disk.

F

Specify the path to the recovery file on the hard disk.

G

Start the computer by using the Windows 2000 Professional CD-ROM.

如果没有搜索结果或未解决您的问题，请直接 联系老师 获取答案。
相似问题和答案

第1题：

You install Microsoft Windows Vista on a new computer that is not connected to the Internet. After you log on, you receive a warning message about an unknown device.You need to prevent the display of the warning message until you download an available hardware driver.What are the two possible ways to achieve this goal? （）

A.A

B.B

C.C

D.D


参考答案：A, D

第2题：

You install Windows 2000 Professional onto an NTFS partition on your computer. During theinstallation, you manually specify the OEM driver for the tape device SCSI controller. After theinstallation, you run the Winnt32 /cmdcons command. Then you successfully install the latest Windows2000 service pack.Next, you install an updated driver for the tape device SCSI controller. When you restart the system andlog on to the computer, you receive a stop error.You need to restore the functionality of the SCSI controller with the least amount of administrative effort.  What should you do? （）

  • A、Restart the computer in Safe Mode. Reinstall the functional SCSI controller driver. 
  • B、Restart the computer into Recovery Console. Replace the faulty SCSI controller driver with the functional one. 
  • C、Start the computer by using a Windows 2000 Professional disk. Replace the faulty SCSI       controller driver with the functional one. 
  • D、Install a parallel copy of Windows 2000 Professional in a separate folder. Copy the functional  SCSI controller driver into the original system folder, and restart the computer to the previous installation.

正确答案:A

第3题：

You are installing Windows 2000 Server on a new computer that has a hardware-based RAID array, a floppy disk drive, and a CD-ROM drive. The disk controller for the RAID array is not included on the current Hardware Compatibility List (HCL). You run Windows 2000 Setup by starting the computer from the Windows 2000 Server CD-ROM.

When the computer restarts at the end of the text mode portion of Windows 2000 Setup, you receive the following STOP error: "INACCESSABLE_BOOT_DEVICE ".

Which two actions should you take to eliminate the STOP error? (Choose Two)

A. Modify the Boot.ini file.

B. Restart Windows 2000 Setup by using the Windows 2000 Server CD-ROM.

C. Select Safe Mode from the Windows 2000 boot menu.

D. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.

E. Install a driver for the RAID controller form. a floppy disk.

F. Use Device Manager to update the driver for the RAID controller.


正确答案：BE
B,E 解析：Explanation: The boot drive is inaccessible and only the text mode partition of the installation process was successful. We need to install the correct driver for the boot disk. We do this by restarting the installation process from the Windows 2000 installation CD, and during the early part of Setup, we watch the bottom of the screen for a line that prompts us to press F6. Then we press F6 and install the RAID driver from the diskette.

Incorrect answers:
A: The boot.ini points to the correct partition, but the correct drivers have not been installed yet.

C: The boot menu is not reached.

D: We must use the Windows 2000 Server CD-ROM to restart the installation process.

F: We will not be able to start the Device Manager. The installation process has failed.

第4题：

You are the administrator of your company’s network. You attempt to install a printer driver on a Windows 2000 computer for a user named Linda.  You receive the following error message： "Error 11-Cannot install printer driver."  The driver was originally downloaded from the printer manufacturer’s Web site. You have successfully used the driver in the past on their Windows 2000 Professional computers.  You want to configure Linda’s computer to check for driver integrity and to allow you to install this printer driver.  What should you do？ （）

  • A、Configure driver signing to display a message before installing an unsigned driver.
  • B、Configure driver signing to ignore File Signature Verification.
  • C、Create a Local Computer Policy to enable Windows File Protection.
  • D、Use the Add Printer Driver wizard to install the driver.Create a Local Computer Policy to enable Windows File Protection.
  • E、Use the Print Troubleshooter.
  • F、Configure the computer to prevent the installation of unsigned drivers.

正确答案:A

第5题：

You install a 16-Bit ISA sound card on your Windows 2000 Professional computer. You install the manufacturer’s device driver for the sound card. You then restart the computer. During the start up process, the computer stops loading and Windows 2000 Professional. You restart the computer, and again the computer stops loading Windows 2000 Professional computer.  You start the computer in Safe Mode. What should you do next?（）

  • A、Remove the sound card device driver by enabling driver signing.
  • B、Remove the sound card device driver by disabling driver signing.
  • C、Disable the sound card device driver by using the disable command.
  • D、Disable the sound card device driver by using computer management.

正确答案:D

第6题：

You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？ （）

  • A、Configure Windows 2000 Professional to enable driver signing.
  • B、Configure Windows 2000 Professional to disable driver signing.
  • C、Start the computer by using the recovery console， restore the system state data.
  • D、Start the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
  • E、Start the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.

正确答案:A,D

第7题：

One user has a Video Capture Card installed on her pc. She uses it to capture video pictures.  She complains the video capture card is not working properly and she couldn't view captured video. You check out the Device manager, which does not indicate any Video devices installed on your system, but you see a yellow mark placed besides the audio device. What should you do in order to make the video capture device work? （）

  • A、Enable the device in Device manager 
  • B、Install new driver from Device Manager 
  • C、Disable PNP and install manually 
  • D、Copy the manufacturer's driver to WINNT/driver cache/i386/ and then let Windows 2000 to install the device.

正确答案:B

第8题：

You install Windows Vista on a new computer by using the retail installation media.You install a new hardware device. You are not prompted for any drivers and the installation completes successfully.You discover that an updated driver is available for the hardware device.You need to install the updated driver.What should you do?（）

A.A

B.B

C.C

D.D


参考答案：C

第9题：

You have a computer that runs Windows XP Professional. You download new video card driver from the Internet, and then install the driver. You restart the computer. You discover that the newly loaded video driver is named VgaSave.  You need to restore the previous version of the video card driver.What should you do?（） 

  • A、From the Device Manger, scan for hardware changes. 
  • B、From the Device Manager, access the video card properties, and then select Roll Back. 
  • C、From the Device Manager, access the VgaSave properties, and then run the Hardware Troubleshooter. 
  • D、Restart the computer. From the Advanced Startup Options menu, select Last Known Good Configuration. 

正确答案:B

第10题：

You install a new AGP video adapter in your Windows 2000 Professional computer. You install the manufacturer’s device drivers provided with the adapter and reboot your computer to load these drivers. During the startup process， the monitor goes blank and your computer stops responding after that and even does not boot properly. What should you do to solve this problem？ （）

  • A、Start the computer by using Windows 2000 professional CD and then use Emergency Repair Disk. Restore the original adapter driver settings
  • B、Start the computer in the debug mode. Restore the original adapter driver settings
  • C、Start the computer in Safe mode. Rename the AGP device by using device manager
  • D、Start the computer by using the recovery console. Rename the AGP driver. 

正确答案:A

更多相关问题
相关内容