You administer a Windows 2000 Professional computer that is 

题目
单选题
You administer a Windows 2000 Professional computer that is shared by multiple users. You receive a phone call from one of the users of the shared computer that tells you that the computer is reporting a kernel stop error. You notice that a user has tried to install video drivers that have caused the computer to become unstable. You want to ensure that users can install only the drivers that are approved by the manufacturer.  What should you do? ()
A

Configure File signature verification to block driver installation, and set driver signing as a system default.

B

Remove all users from the Power User group.

C

Create a Local Computer Policy to prevent users from installing drivers.

D

Create a Local Computer Policy to enable Windows File Protection.

如果没有搜索结果或未解决您的问题,请直接 联系老师 获取答案。
相似问题和答案

第1题:

You are upgrading a computer from Windows 98 to Windows 2000 Professional. The computer is a 400-Mhz Pentium III, and has 128 MB of RAM and a 10-GB hard disk. You are performing the installation by using the Windows 2000 Professional CD-ROM. After the text mode installation portion is complete, you restart the computer. The BIOS virus checker on your computer indicates you're your computer is infected with a Master Boot Record virus.

What should you do before you continue the installation?

A.Remove the virus checker in Windows 98.

B.Disable the BIOS virus checker and restart the computer.

C.Run Fixmbr.Exe from the Windows 2000 Professional CD-ROM.

D.Modify the Boot.ini file to include a signature parameter on the ARC path of the system partition.


正确答案:B
解析:Explanation: During the installation of Windows 2000, the setup program must make changes the boot sector. The BIOS virus checker interprets changes made to the boot sector as the result of a virus and prevents the computer from booting any further. You must therefore disable the BIOS virus checker.

Incorrect answers:
A: Removing the virus checker in Windows 98 before starting the upgrade process could increase the performance of the upgrade. However, it is the BIOS virus checker on the computer that is indicating that the computer has a Master Boot Record virus. In this case the BIOS virus checker is the problem though.

C: You can fix a faulty master boot record by starting the Recovery Console and using the Fixmbr command. However, the master boot record has not been corrupted in this scenario. The BIOS virus checker has mistakenly detected a possible virus.

D: The Boot.ini file points to the correct boot partitions on a dual boot system. It does not indicate a boot sector virus warning. The BIOS virus checker has mistakenly detected a boot sector virus and has generated the warning.

第2题:

You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it, and then you restart the computer. When Win2000 Professional loads, you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do? ()

  • A、Configure Windows 2000 Professional to enable driver signing.
  • B、Configure Windows 2000 Professional to disable driver signing.
  • C、Start the computer by using the recovery console, restore the system state data.
  • D、Start the computer in safe mode, replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
  • E、Start the computer in debug mode, replace the camera driver with a Windows 2000 Professional driver by using Device Manager.

正确答案:A,D

第3题:

You are the administrator of your company's network. Your network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations.

You want to accomplish the following goals:

1. An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.

2. Existing user environments will be maintained on the Windows 2000 Professional computers.

3. The network name of each Windows 2000 Professional computer will be changed to match its asset tag.

4. The RIS image and the upgraded applications will be enabled as they are added to the network.

You take the following actions:

1. Install the RIS image on a Windows 2000 Professional computer named Computer1.

2. Install the upgraded applications on Computers1.

3. Change the network name of Computer1 to %DMI-SERIAL_NUM%.

4. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server.

5. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server.

Which result or results do these actions produce? (Choose all that apply.)

A.An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.

B.Existing user environments will be maintained on the Windows 2000 Professional computers.

C.The network name of each Windows 2000 Professional computer will be changed to match its asset tag.

D.The RIS image and the upgraded applications will be enabled as they are added to the network.


正确答案:AD
解析:Explanation: The following steps are taken:
The RIS image is created then the applications are installed on Computer1 before the new RIS image was created using the RIPrep utility. All the applications will be included in this image. Furthermore, you have loaded the new RIS image on to the RIS server, started all of the Windows 2000 Professional computers, and then loaded the RIS image from the RIS server. Unattended installations of the upgraded applications will thus be performed.

Incorrect answers:

B: The hard drives on the computers are overwritten when the new RIS image is loaded. Therefore the existing user environments will not be maintained but will be replaced.

C: No special action is taken to handle the naming of the Windows 2000 Professional computers. The renaming of Computer1 to %DMI_SERIAL_NUM% does not accomplish the naming of the Windows 2000 Professional computers.

第4题:

You install Windows 2000 Professional on a new APM-compliant portable computer. You notice that whenever you attempt to shut down the computer, the Windows 2000 shutdown screen remains on the screen as the power remains on. You attempt to shut off the computer by using Power Button, but you want the computer to shut off when Windows 2000 Professional shuts down. What should you do? ()

  • A、Restart the computer, disable APM in the system BIOS, and then restart the computer. 
  • B、Restart the computer, use power options in control panel to enable APM, and restart the  computer. 
  • C、Restart the computer, use power options in control panel to enable hibernate support, and  then restart the computer. 
  • D、Restart the computer, use power options in control panel to create a different power scheme,  and then restart the computer. 

正确答案:B

第5题:

You administer a Windows 2000 network at Company's main office.  You have purchased 15 new Windows 2000 Professional computers that will be used in the finance department. The new computers are equipped with a fax modem. You install the Fax service with the default values and settings on each computer. You want to prevent users from using the Control Panel to remove the fax printer. What should you do?()

  • A、Remove the users’ account from the DACL for the fax printer.
  • B、Edit the local Computer Policy to prevent users from using Printers in Control Panel.
  • C、Edit the local Computer Policy. Configure the Prevent deletion of printers setting to enabled.
  • D、Edit the local Computer Policy. Configure the Prevent addition of printers setting to disabled

正确答案:B,C

第6题:

You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional.

Each computer has an 8 GB hard disk.

You configure the hard disk on each computer to have two 4 GB partitions. Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D.

In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.

You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.

What should you do?

A.Use Windows 2000 Professional to configure drive D as a dynamic partition.

B.Use Windows 2000 Professional to enable encrypting file system on drive D.

C.Use Windows NT workstation to configure NTFS permissions on drive D to deny the users write permission.

D.Reinstall Windows NT Workstation after configuring disk quotas.


正确答案:C
解析:Explanation: You can use NTFS permissions to prevent users from saving files to a specific drive, partition or folder. NTFS permissions can be set on Windows NT computers that use the NTFS file system. Setting the NTFS permissions to deny users write permissions will prevent the users from saving work files on the disk.

Incorrect answers:
A: Windows NT users cannot use dynamic partitions, as dynamic partitions are a storage feature that has been introduced with Window 2000. Thus, configuring drive D as a dynamic partition will prevent the Windows NT Workstation users from using the disk. However, the Windows 2000 Professional users will still be able to make use of the drive and to store files on the drive.

B: The Encrypting File System (EFS) is a file and folder security mechanism used to prevent unauthorized users from accessing encrypted files. This does not prevent users from saving files on the disk. It only prevents them from opening and reading encrypted files.

D: Reinstalling Windows NT will not prevent users in Windows 2000 to save files on disk D. As the installation process does not have an option to prevent users from saving files to specified locations.

第7题:

You install a 16-Bit ISA sound card on your Windows 2000 Professional computer. You install the manufacturer’s device driver for the sound card. You then restart the computer. During the start up process, the computer stops loading and Windows 2000 Professional. You restart the computer, and again the computer stops loading Windows 2000 Professional computer.  You start the computer in Safe Mode. What should you do next?()

  • A、Remove the sound card device driver by enabling driver signing.
  • B、Remove the sound card device driver by disabling driver signing.
  • C、Disable the sound card device driver by using the disable command.
  • D、Disable the sound card device driver by using computer management.

正确答案:D

第8题:

Ezonexam.com's network consists of Windows 2000 Professional and UNIX client computers. You install a Windows 2000 Server computer on the network. All computers that are connected to the network use TCP/IP as their only network protocol.

Several laser print devices are attached to the UNIX computers. You want to enable the Windows 2000 Professional computers to print to these printers. You want to make the minimum number of configuration changes necessary to achieve this goal.

What should you do?

A.Install Simple TCP/IP services on the Windows 2000 Server computer. Configure printers on the Windows 2000 Server computer to print to the print device attached to the UNIX computers.

B.Install Print Services for UNIX on the Windows 2000 Server computer. Configure shared printers on the Windows 2000 Server computer. Configure the UNIX computers to print to these shared printers.

C.Disconnect the print devices from the UNIX computers and connect them to the Windows 2000 Server computer. Share the printers, and configure the Windows 2000 Professional computers and the UNIX computers to print to the shared printers.

D.On the Windows 2000 Server computer, configure shared printers that connect to the print devices attached to the UNIX computers. Configure the Windows 2000 Professional computers to print to the shared printers on the Windows 2000 Server computer.


正确答案:D
解析:Explanation:WeneedtoenabletheWindows2000ProfessionalclientstoprinttotheprintdevicesattachedtotheUNIXcomputers.ThesimplestwayistocreatesharedprintersonaWindows2000Servercomputer,andconfiguretheWindows2000Professionalclientstoconnecttothesharedprinters.IncorrectAnswers:A:SimpleTCP/IPServicesisnotrelevanttoWindows2000printing.B:ThisanswerishowyoucouldconfigureUNIXclientstousetheprintdevices.WeneedtoenabletheWindows2000Professionalclientstousetheprintdevices.C:ItisnotnecessarytodisconnecttheprintdevicesfromtheUNIXcomputersandconnectthemtotheWindows2000Servercomputer.Therefore,thisisnotthesimplestsolution.

第9题:

You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D.  In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation. You notice that users can still save files to drive D. You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system.  What should you do on each computer? ()

  • A、Use Windows 2000 Professional to configure drive D as a dynamic volume
  • B、Use Windows 2000 Professional to enable Encrypting File System (EFS) on drive D
  • C、Use Windows NT workstation to configure NTFS permission on drive D to deny the users write  permission
  • D、Reinstall Windows NT workstation after configuring the disk code task

正确答案:C

第10题:

You are the network administrator for ExamSheet.net. You administer ExamSheet’s Windows 2000 network. Computers on the network run Windows 2000 Professional, Windows NT Workstation 4.0 and Windows 98. Ten Windows 2000 Professional computers are located in the research department. The users of the Windows 2000 Professional computers run legacy applications which are not certified for Windows 2000. These applications will not run for those users who only have User rights on the computers. You want to uniformly grant the users of these computers with the least possible administrative rights and still allow them to run the applications. What should you do? ()

  • A、On the research computers user the Local Computer Policy to disable theAccess this computer  from the networkoption.
  • B、Apply the Compatws.inf security template to the research computers.
  • C、Apply the Hisecws.inf security template to the research computers.
  • D、On the research computers configure the computer default security settings to prevent anonymous access.

正确答案:B

更多相关问题