单选题After a technician installs a video card, which of the following should the technician configure NEXT?（）A ResolutionB ColorsC Dots per inchD Refresh rate

第1题：

A technician is attempting to configure Windows XP Media Center on a desktop from a CD. The message that comes up on the screen says ‘Missing NTLDR press any key to reboot’. Which of the following should the technician do NEXT?（）

• A、Replace the video card with a compatible one.
• B、Check the Windows XP Hardware Compatibility List.
• C、Verify the boot order in the BIOS.
• D、Install Windows XP RC2 first, then upgrade to Windows XP Media Center.

第2题：

After installing a new video card, the computer loads Windows and continuously reboots. Which of the following would be the FIRST step that a technician should take?（）

• A、Run CHKDSK
• B、Boot to ERD
• C、Run MSCONFIG
• D、Go into Safe Mode

第3题：

第4题：

A technician（技术） has a current baseline（基准线） and is told to install additional（添加） memory and a faster NIC card.  At which point in time should the next baseline be run？（）

• A、 After the memory is installed
• B、 Before the upgrade is performed
• C、 After the NIC is installed
• D、 After the upgrades are performed

第5题：

A customer reports to Karen, a technician, that he is experiencing problems with the display after his computer is fully booted but reports seeing the BIOS splash screen during boot. Which of the following would MOST likely be the cause?（）

• A、The video cable is incorrectly attached.
• B、A corrupted or incorrect video driver is installed.
• C、An incorrect video card is installed in the computer.
• D、The video card is defective and needs to be replaced.

第6题：

A technician installs a CD-RW drive with a feature that enables the drive to write labels directly onto the disk. The computer will burn disks but will not write labels. Which of the following should the technician do NEXT?（）

• A、Reboot the computer
• B、Remove the drive and reinstall
• C、Install the device driver
• D、Flash the BIOS

第7题：

A technician installs a new video card in a desktop with onboard video. The technician boots the unit but sees no display. The monitor power light is on and the OS seems to be loading. Which ofthe following is the MOST likely cause?（）

• A、The display is defective.
• B、The video card needs to be flashed.
• C、The internal adapter has not been disabled.
• D、The new video card is defective.

第8题：

第9题：

After a technician installs a video card, which of the following should the technician configure NEXT?（）

• A、Resolution
• B、Colors
• C、Dots per inch
• D、Refresh rate

第10题：

A laptop will not output to a connected projector. Which of the following steps should a technician take FIRST?（）

• A、Press the appropriate function + monitor key.
• B、Adjust the BIOS settings for external display.
• C、Replace the video card on the laptop.
• D、Update video drivers for the video card.